- ページ 8
エアコン Argo SDIAS8DCのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Argo SDIAS8DC 19 ページ。 Split air conditioner system
Argo SDIAS8DC にも： 取扱説明書 (15 ページ), 取扱説明書 (17 ページ)
ページを印刷するEN
Predispose the fixing of the bracket. Running power
F
electric cable (with a ground wire) between the two
units (see the table of wire section).
Check if the quantity and the rawl plugs type
supplied are the proper ones for fixing the unit on
the wall.
KIT FOR UNDER-CEILING OR WALL
H
INSTALLATION (ALREADY INSTALLED)
Fix the brackets on the back side of the unit using
the bolts supplied in the kit.
Use rawl plugs suitable to the wall consistence and
four threaded bars of suitable length. (not supplied).
ø 5
15 cm
Floor installation.
G
Attach the bracket to the wall with the screws, but
do not tighten the screws all the way, so that you
can move the bracket for final adjustment. Adjust
the bracket as shown in the figure, then finish
tightening the screws. Hang the unit on the bracket
as shown in the figure.
20 - 40 mm
Wall installation
8
35 - 45
mm
Under-ceiling
installation