Hardware Features
Table 1-1
Summary of Cisco 2600 Series LAN Interfaces (continued)
Ethernet
Model
(10BASE-T)
Cisco 2621XM —
Cisco 2650
—
Cisco 2650XM —
Cisco 2651
—
Cisco 2651XM —
Cisco 2691
—
In addition to the interfaces listed in
features:
•
•
•
•
•
•
Figure 1-1
Cisco 2600 series routers are either single rack-unit (1RU) or two rack-unit (2RU) high.
Note
The number and type of interfaces vary, depending on the specific router.
Note
Figure 1-1
Cisco 2650
Cisco 2600 Series Routers Hardware Installation Guide
1-2
Token Ring
(RJ-45)
—
—
—
—
—
—
Dynamic random-access memory (DRAM) for main memory and shared memory (Cisco 261x and
Cisco 262x routers)
Synchronous dynamic random-access memory (SDRAM) for main memory and shared memory
(Cisco 26xxXM, Cisco 265x, and Cisco 2691 routers)
Nonvolatile random-access memory (NVRAM) for storing configuration information
Flash memory—Stores the operating system software image. In Cisco 2691 routers, flash memory
is a CompactFlash memory card. In all other Cisco 2600 series routers, flash memory is a single
inline memory module (SIMM).
EIA/TIA-232 (RJ-45) console port for local system access by using a console terminal
EIA/TIA-232 (RJ-45) auxiliary port for remote system access or dial backup by using a modem
and
Figure 1-2
show examples of Cisco 2600 series routers.
Cisco 2600 Series Router Rear Panel—Example of 1RU Router
W1
10/100BASE-T
Ethernet 0/0
(RJ-45)
Fast Ethernet
Network
(10/100)
Module Slot
2
1
1
1
1
1
2
1
2
1
2
1
Table
1-1, Cisco 2600 series routers include the following hardware
Cisco 2650
100-240V– 1A
50/60 Hz 47 W
W0
LINK
ETHERNET 0 ACT
CONSOLE
AUX
Auxiliary port
(RJ-45)
Console
port (RJ-45)
Chapter 1
Overview of Cisco 2600 Series Routers
Advanced
WAN Interface
Integration
Card Slots
Module Slots
2
1
2
1
2
1
2
1
2
1
3
2
OL-2171-06
ページを印刷する