- ページ 7

エアコン Argo ULISSE ECOのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Argo ULISSE ECO 14 ページ。 Room air conditioner with remote condenser
Argo ULISSE ECO にも：取扱説明書 (16 ページ)

ページを印刷する

8 - WALL INSTALLATION (THROUGH A HOLE IN THE WALL)

IMPORTANT

OPERATION TO BE EXECUTED BY COMPETENT OR QUALIFIED PERSONEL

1. Before disassembling the outdoor unit (disjoin the rapid couplings): connect the air conditioner to a socket and let

the compressor work for 5 minutes. During the disassembling operation, beat lightly with a spanner on the rapid

coupling brass body (exagonal part).

2. Lubricate the joint surfaces (rapid coupling) with a little bit of HAB oil only (synthetic oil Alkylbenzene type ex.

EXXON ZERICE S ).

3. When you disjoin the outdoor unit, follow the described succession: first, disconnect the power supply of the air

conditioner (disconnect the plug), disconnect the electric connector, then the pipes of the frigorific connection.

Choose the best position where to install indoor

unit. Mark the hole to be made in the wall.

ø 50

Remove the coupling cover of the outdoor unit.

Loosen the quick coupling using the 19-21 mm

spanners first and then the 19-24 mm spanners.

Unscrew the flare nuts by hand and disconnect

the flexible tube.

NOTE: When disconnecting or reconnecting the flex-

ible tubes, always use two proper wrenches: one to

hold the fixed part and one to screw/unscrew.

Plastic plugs

Drill a 50 mm diameter hole, insert a PVC pipe.

Indoor

Disconnect the condensate plastic tube and the

electric connector.

Protect quick coupling (on flexible tube and out-

door unit) with plastic plugs supplied as accesso-

ries. To insert the tubing into the hole in the wall

easily and without damages, join the pipe ends

and wrap them with adhesive tape.

Outdoor

5 - 10 mm