- ページ 9

ネットワーク・ハードウェア Cisco 3750G - Catalyst Integrated Wireless LAN ControllerのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3750G - Catalyst Integrated Wireless LAN Controller 49 ページ。 Integrated wireless lan controller switch
Cisco 3750G - Catalyst Integrated Wireless LAN Controller にも: 設定マニュアル (40 ページ)

Cisco 3750G - Catalyst Integrated Wireless LAN Controller スタートマニュアル

Refreshing the PC IP Address

After you complete Express Setup, you should refresh the PC IP address:
• For a dynamically assigned IP address, disconnect the PC from the switch, and reconnect it to the
network. The network DHCP server assigns a new IP address to the PC.
• For a statically assigned IP address, change it to the previously configured IP address.
4

Managing the Switch

After you complete Express Setup and install the switch in your network, use the device manager or
other management options described in this section for further configuration.

Using the Device Manager

The simplest way to manage the switch is by using the device manager that is in the switch memory.
This is an easy-to-use web interface that offers quick configuration and monitoring. You can access
the device manager from anywhere in your network through a web browser.
Follow these steps:
1. Launch a web browser on your PC or workstation.
2. Enter the switch IP address in the web browser, and press Enter. The device manager page appears.
3. Use the device manager to perform basic switch configuration and monitoring. Refer to the device
manager online help for more information.
4. For more advanced configuration, download and run the Cisco Network Assistant, which is
described in the next section.

Downloading Cisco Network Assistant

Cisco Network Assistant is a software program that you download from Cisco.com and run on
your PC. It offers advanced options for configuring and monitoring multiple devices, including
switches, switch clusters, switch stacks, routers, and access points. Network Assistant is free—there is
no charge to download, install, or use it.
Follow these steps:
1. Go to this Web address: http://www.cisco.com/go/NetworkAssistant.
You must be a registered Cisco.com user, but you need no other access privileges.
2. Find the Network Assistant installer.
9