- ページ 14

ネットワーク・ハードウェア Cisco 3800 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3800 Series 40 ページ。 Password recovery procedure
Cisco 3800 Series にも：データシート (8 ページ), アプリケーションノート (41 ページ), トラブルシューティングマニュアル (15 ページ), データシート (20 ページ), 設定 (32 ページ), ユーザーマニュアル (7 ページ)

Figure 8

Bracket Installation for Center Mounting with Rear Panel Forward

NM -

ES W-

15x

Fas tEth

ern et Por

15x 7x

14x

13x

12x

11x 3x

10x

Left bracket

for 23-inch rack

Left bracket

for 19-inch rack

Installing the Router in a Rack

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to

ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component

at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Statement 1006

Be sure to leave space above and below each router in a rack, to allow for cooling air circulation.

Caution

Use two screws for each side (supplied with the rack, not with the router).

Start the lower pair of screws first, and rest the brackets on the lower screws while you insert the upper pair of screws.

Tip

Attaching the Cable Management Bracket

The optional cable management bracket provides attachment points for organizing and routing cables. Attach the cable

management bracket to the left or right rack-mount bracket using the screw provided. You can attach the cable management

bracket to either the upper or the lower threaded hole. See Figure 9 for attachment locations.

Ext

Pwr

-48V

10/1 00/

100 0

Bas e-Tx

Use six screws on each side.

Right bracket

for 19-inch rack

Right bracket

for 23-inch rack