ページを印刷する
• Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock or injury to people.
• Ensure that the mains power complies with the voltage specified on the fan heater 's data plate (220-240V~/50Hz).
• This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
• This heater has been projected in order to install it on the wall, you should keep 1,8 m from the floor and at least
25 cm from the two sides of the wall. Do not put it on the floor.
• This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or
without the necessary experience and knowledge, unless they have been adequately supervised and instructed
concerning use of the appliance by a person responsible for their safety.
• Do not restrict the air inlet and outlet grilles.
• The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.
• Ensure that all objects are at least 1 meter from the front and sides of the appliance.
• Disconnect the mains power when the appliance is not used or for cleaning operations.
• Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in workshops or
garages) or paint vapours.
• Do not place anything on the appliance, use the appliance to dry clothing.
• Use the appliance in a well-ventilated area.
• Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may
damage the appliance.
• To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.
• Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced
by the service centre so as to avoid any safety risks.
• Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact a service centre to
examine the appliance or perform any electrical or mechanical repairs.
• The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
• Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
• To disconnect the fan heater, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid
pulling on the cord when disconnecting the fan heater.
• Do not place any objects on the cord and do not bend it.
• It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension
cord to operate multiple appliances.
• Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
• Do not touch the plug with wet hands.
• Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.
The symbol below signals the above warning:
• The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable
material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE MATERIALS.
• Do not connect the appliance to the mains power before it has been properly assembled and positioned.
• Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally pulled-out.
• Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.
• Do not position the fan heater below a socket outlet.
• Do not operate the appliance outdoors.
WARNING: do not use the fan heater with a controller or any other external device that activates the appliance
automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.
• Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating
up of the internal heating elements, and should not recur later on.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING
POWER. WHEN SERVICING OR MOVING THE FAN HEATER, ALWAYS UNPLUG THE POWER CORD.
• A fan heater has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such as
flammable, explosive, chemical-laden or wet atmosphere.
• Always unplug the fan heater when not in use.
• In order to avoid accidents turn unit off if unattended.
• In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not
attempt to repair it and take it to your local after sales service.
V 05/14
GENERAL SAFETY INFORMATION
8