- ページ 4
ヒーター Argo IP24のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Argo IP24 10 ページ。 Electric convector heater with glass panel
ページを印刷する
in water or other liquids.
Do not touch the plug or convector with wet hands.
Avoid using the convector in dusty environments or in the
presence of flammable vapours (e.g. in workshops or garages).
Do not place the convector above or near another heat source.
WARNING: AVOID COVERING THE CONVECTOR TO PREVENT IT
FROM OVERHEATING.
The symbol below signals the above warning:
The convector may cause risk of fire if, while in operation, is
covered by or comes into contact with flammable material including
curtains, drapery, blankets, etc. KEEP THE CONVECTOR AWAY
FROM THESE MATERIALS.
Do not insert and avoid accidental insertion of any external
objects into the ventilation or discharge outlets as this may lead to
electric shock, fire or damage the convector.
A convector contains parts that generate arcs or sparks. It must
not be used in potentially dangerous areas such as areas at risk of
fire or explosion, or areas loaded with chemical substances or
humidity.
Do not use the convector on soft surfaces such as beds, where
the grilles may be covered. Always stand the convector on a flat,
stable surface when in operation, in order to prevent it from
overturning. Arrange the cord in such a way that the convector and
other objects do not rest on it. Do not run the cord under carpets. Do
not cover the cord with blankets, carpets or similar materials. Place
the cord far away from busy areas, or in a place where it cannot be
accidentally pulled-out.
This convector cannot be used in bathrooms, laundry rooms, next
to a shower or swimming pool or in similar indoor environments.
Never position the convector where it may fall into a bath or other
containers of water.
Never position the convector on a wet floor.
In any case, the adjustment knobs must never be accessible by
anyone in a bath or shower.
Do not position the convector below an electric socket.
The socket must be earthed.
Do not allow the electric cord to touch the metal structure of the
V 09/16
15