- ページ 7

ヒーター Argo IP24のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Argo IP24 10 ページ。 Electric convector heater with glass panel

Unscrew the two screws on top of the 2

vertical bars of the wall bracket.

3. Remove the bracket for wall mounting from the convector completely.

4. By supporting the bracket onto the wall, mark on the

wall with a pencil the points where it is necessary to

make the holes in order to insert the Fishers. Observe

the minimum distances from the walls as pointed out

in the picture below.

6. Place the unit upright.

bracket into the holes on the rear of the convector in the

lower part.

V 09/16

Insert the two lower parts of the

Pull down the wall bracket by pressing downward on the

top of the two vertical bars of the wall bracket.

5. Drill holes in the wall and insert the 4 Fishers.

Secure the bracket to the wall and insert the 4

screws supplied.

Insert the two

holes on the rear of the convector in the upper

part.

upper parts of the bracket into the