- ページ 32

ネットワーク・ハードウェア Cisco 7246 - uBR RouterのPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7246 - uBR Router 42 ページ。 7200 series port adapter hardware configuration guidelines
Cisco 7246 - uBR Router にも：設定 (28 ページ), ユーザーマニュアル (7 ページ)

ページを印刷する

Messages for One Port Use of Specific Port Adapters and an I/O Controller

NPE-G1 or NPE-G2

The following messages appear in a system with an NPE-G1 or NPE-G2 installed. To provide examples

of the messaging, the following two sample hardware configurations are referred to in the example

output message.

Example 1: Showing an acceptable configuration

Example 2: Showing an oversubscribed configuration.

Cisco 7200 Series Port Adapter Hardware Configuration Guidelines

1-24

Slots 1, 3 and 5: PA-POS-2OC3, PA-2FE

Slots 2, 4 and 6: PA-FE, PA-2H

=========

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points. Current

configuration on bus mb1 has a total of 1000 bandwidth points. The set of PA-2FE,

PA-POS-2OC3, and I/O-2FE qualify for "half bandwidth points" consideration, when full

bandwidth point counting results in oversubscription, under the condition that only

one of the two ports is used. With this adjustment, current configuration on bus mb1

has a total of 500 bandwidth points. This configuration is within the PCI bus capacity

and is supported under the above condition.

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points. Current

configuration on bus mb2 has a total of 400 bandwidth points. This configuration is

within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adapter Hardware

Configuration Guidelines" on Cisco.com <http://www.cisco.com>

for c7200 bandwidth points oversubscription and usage guidelines.

Slots 1, 3 and 5: PA-2FE

Slots 2, 4 and 6: PA-POS-2OC3, PA-FE, PA-2H

=========

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.Current

configuration on bus mb1 has a total of 400 bandwidth points. This configuration is

within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points. Current

configuration on bus mb2 has a total of 1000 bandwidth points. The set of PA-2FE,

PA-POS-2OC3, and I/O-2FE qualify for "half bandwidth points" consideration, when full

bandwidth point counting results in oversubscription, under the condition that only

one of the two ports is used. With this adjustment, current configuration on bus mb2

has a total of 700 bandwidth points. This configuration has oversubscripted the PCI

bus and is not a supported configuration.

Please refer to the following document "Cisco 7200 Series Port Adapter Hardware

Configuration Guidelines" on Cisco.com <http://www.cisco.com>

for c7200 bandwidth points oversubscription and usage guidelines.

Chapter 1

Cisco 7200 Series Port Adapter Installation Requirements

OL-3875-11