- ページ 29

ネットワーク・ハードウェア Cisco 7505のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7505 32 ページ。 600w ac-input power supply and fan tray replacement
Cisco 7505 にも：交換取扱説明書 (23 ページ), 取付説明書 (15 ページ), 交換取扱説明書 (18 ページ)

ページを印刷する

Install Field Replaceable Units (FRUs)

Replace the Power Supply

Power harness

Phillips

screws

(2 places)

Backplane

power

receptacle

Removing/replacing

power supply

Handling the

power supply

Step 1

Power supply ears

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Hold the power supply as shown in C, and

slide it into the bottom of the chassis. Use

the handles to push the supply all the way

into the chassis until the ears on both sides

are ﬂush against the chassis frame.

Use a Number 2 Phillips screwdriver to

replace the two M4 x 10-mm Phillips

panhead screws to secure the two power

supply ears to the chassis frame.

Reattach the power harness plug to the

backplane receptacle. Ensure that the plug

is fully seated in the receptacle.

Replace the power harness cover.

Replace the fan tray.

Replace the cover panel.

For AC-input power supplies: On the

interface processor side of the power

supply, replace the cable retention clip on

the AC input port by pinching the sides of

the retention clip together and letting the

ends of the retention clip snap outward

into the holes in the jackscrews.

For DC-input power supplies: To provide

strain relief for the DC-input cable,

replace the nylon cable tie with a new

nylon cable tie.