ネットワーク・ハードウェア Cisco 7513 SeriesのPDF 維持をオンラインで閲覧またはダウンロードできます。Cisco 7513 Series 20 ページ。 Chassis replacement
Cisco 7513 Series にも：クイック・スタート・マニュアル (44 ページ), 交換取扱説明書 (26 ページ), データシート (11 ページ), マニュアル (30 ページ), 交換取扱説明書 (19 ページ), 交換取扱説明書 (22 ページ)

Maintaining Your Cisco 7513, Cisco 7513-MX, and

Cisco 7576 Router

Your Cisco 7513, Cisco 7513-MX, or Cisco 7576 router is configured to your order and is ready for

installation and startup when it leaves the factory. After you install and configure your router, you might

have to perform specific maintenance procedures and operations to ensure that the router is operating

properly, to upgrade specific system components, or to replace components with spare parts or

field-replaceable units (FRUs). This chapter describes procedures and maintenance operations required

to maintain your Cisco 7513, Cisco 7513-MX, or Cisco 7576 router.

Note

Detailed, up-to-date instructions (called configuration notes) are available on Cisco.com.

The Cisco 7513, Cisco 7513-MX, and Cisco 7576 allow you to remove and replace interface processors

and RSPs while the system is powered on; however, you must shut down the system power before

accessing the chassis interior for any other reason.

Note

If you intend to remove and replace an interface processor or RSP while the system is powered on, do

so only when no operations are taking place that involve the RSP NVRAM or Flash memory. This

includes operations involving system configuration changes and downloading microcode images.

This chapter provides specific component replacement instructions for upgrading, removing, or

replacing the following components:

Chassis cover panels

•

Blower module assembly

•

Card cage assembly

•

Chassis interface (CI) board

Power supply removal (power supply installation is discussed in the

•

7513-MX, and Cisco 7576 Power Supplies" section on page

To help prevent problems, before performing any procedures in this chapter, review the

Caution

Recommendations" section on page

OL-5008-03 B0

C H A P T E R

2-2.

Cisco 7500 Series Installation and Configuration Guide

"Installing Cisco 7513, Cisco

3-27).

"Safety

7-1