- ページ 5

ネットワーク・ハードウェア Cisco 7600 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7600 Series 14 ページ。 Cisco 7609: frequently asked questions
Cisco 7600 Series にも：よくある質問 (5 ページ)

ページを印刷する

Chapter 2

Overview: Cisco 7600 Series SIPs

Figure 2-1

Cisco 7609 router. The Cisco 7600 SIP-200 supports four subslots for the installation of SPAs. In this

example, the subslot locations are vertically oriented as follows:

•

Figure 2-3

7600-SIP-200

SPA INTERFACE

PROCESSOR

In this view, the subslot locations in a horizontal orientation are as follows:

•

The SIP subslot numbering is indicated by a small numeric label beside the subslot on the faceplate.

Just as with the SIPs, some commands allow you to display information about the SPA itself, such as

show idprom module and show hw-module subslot. These commands require you to specify both the

physical location of the SIP and SPA in the format, slot/subslot, where:

•

For example, to display the operational status for the SPA installed in the first subslot of the SIP in

chassis slot 6 shown in

Router# show hw-module subslot 6/0 oir

For more information about SIP commands, refer to the

References and to the

Cisco 7600 SIP-200 Overview

The following sections describe the Cisco 7600 SIP-200 (Cisco part number 7600-SIP-200):

•

OL-5052-14

shows an example of a Cisco 7600 SIP-200 installed with a vertical orientation on a

SIP subslot 0—Top–right subslot

SIP subslot 1—Bottom–right subslot

SIP subslot 2—Top–left subslot

SIP subslot 3—Bottom–left subslot

shows the faceplate for the Cisco 7600 SIP-200 in a horizontal orientation.

Cisco 7600 SIP-200 Faceplate

SIP subslot 0—Top–left subslot

SIP subslot 1—Top–right subslot

SIP subslot 2—Bottom–left subslot

SIP subslot 3—Bottom–right subslot

slot—Specifies the chassis slot number in the Cisco 7600 series router where the SIP is installed.

subslot—Specifies the secondary slot of the SIP where the SPA is installed.

Figure

Cisco IOS Software Releases 12.2SX Command

Cisco 7600 SIP-200 Processor, page 2-6

Cisco 7600 SIP-200 LEDs, page 2-6

Cisco 7600 SIP-200 Physical Specifications, page 2-6

Cisco 7600 SIP-200 Memory Options, page 2-7

Cisco 7600 SIP-200 Default DIP Switch Settings, page 2-8

2-1, enter the following command:

Cisco IOS Software Releases 12.2SR Command

Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide

Cisco 7600 SIP-200 Overview

References.

2-5