ページを印刷する
TOUCH BUTTONS AND LED INDICATORS
The buzzer will alarm for several times when the unit is powered on, the LED will show the room humidity
for 3 seconds, then it will automatically turn off.
1.Turn on/off button
Touch the button
is operating.
2. Humidity setting button
Touch the button
from 40% to 80%, every setting is 5%, the LED flashing display when adjusting. Stop pressing for 5
seconds, it will return to normal display. The default value of humidity is 55%.
3. Fan-speed setting button
Touch the button
lighted.
4.Swing setting button
After the appliance is started, touch the button
5.Time-setting button
Touch the button
time, you may touch
Touch
to enter shutdown-time setting state when the unit is running, then the LED will display the
time, you may touch
Once turned on or off by user or entering water-full state, the unit may loose the timing function.
V 04/20
to start the unit when the unit is stop, or touch
to enter humidity-setting state, then touch
to set the fan speed to HIGH or LOW, and the corresponding fan speed light will be
to enter boot-time setting state when the unit is stop, then the LED will display the
or
button to adjust the automatic boot time from 1 to 24 hours.
or
button to adjust the automatic shutdown time from 1 to 24 hours.
or
to start or stop the air-outlet leaf swing
to shutdown it, when the unit
to adjust the humidity
24