ページを印刷する
MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE
Warning
Always pull the dehumidifier's plug out of the power socket before cleaning it, to prevent electric
shock and malfunction.
Warning
Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.
Use a damp and soft cloth to clean the exterior surface of the dehumidifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage
the surface or colour of the casing.
We recommend to clean the water tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank
with clean water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.
WARNING!
Unplug the unit before start cleaning the air filter.
The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be higher than normal.
Cleaning instructions:
1.
Remove the filter by pulling down the grid to complete extraction. Clean the filter washing it with
warm soapy water.
DO NOT USE ALCOHOL, BENZENE OR OTHER AGGRESSIVE PRODUCTS TO CLEAN THE FILTER.
Do not use the dehumidifier without the filter as dust may affect the efficiency of the evaporator, resulting in higher
energy consumption.
V 04/20
CLEANING AND MAINTENANCE
CLEANING THE WATER TANK
CLEANING THE AIR FILTER
25