ネットワーク・ハードウェア Cisco Aironet 1000 SeriesのPDF アップグレードをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1000 Series 28 ページ。 Install and upgrade internal modules and field replaceable units
Cisco Aironet 1000 Series にも：配備マニュアル (40 ページ), マニュアル (20 ページ)

ページを印刷する

Install and Upgrade Internal Modules and Field

Replaceable Units

The Cisco 1000 Series Integrated Services Routers have internal modules and field-replaceable units (FRUs)

that can be quickly and easily removed and replaced without having to send the entire router for repair.

This section describes how to install the internal modules and FRUs in the Cisco 1000 Series Integrated

Services Routers. The information is contained in the following sections:

•

Replace the Chassis Covers for C111X and C1111x

To access the internal modules on the router, you must first remove the chassis cover. See the instructions

below on how to remove and later replace the chassis cover on the routers.

Warning

Cisco 1000 Series Integrated Services Routers have removable covers. Do not run the routers with the cover

off. Doing so can cause the router to overheat very quickly.

Use a number-2 Phillips screw driver to perform the following tasks.

Replace the Chassis Covers for C111X and C1111x, on page 1

External Modules, on page 4

Install and Remove Small Form Pluggable Modules, on page 5

Install a Pluggable Interface Module, on page 6

Installing a SIM Card on C111X, C1109-2PX, C1109-4P, on page 26

Only trained and qualified personnel should be allowed to install, replace or service this equipment. Statement

1030

Install and Upgrade Internal Modules and Field Replaceable Units