- ページ 23

ネットワーク・ハードウェア Cisco Aironet 1250 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1250 Series 37 ページ。 Aironet 1250 series
Cisco Aironet 1250 Series にも：設定マニュアル (40 ページ), データシート (14 ページ), ハードウェア・インストール・マニュアル (10 ページ)

ページを印刷する

1. Configuring the Access Point

Connecting to an Ethernet Network with an Inline Power

Source

Caution

Be careful when handling the access point; the bottom plate

might be hot.

Note

If your access point is connected to in-line power, do not connect the

power module to the access point. Using two power sources on the

access point might cause the access point to shut down to protect

internal components and might cause the switch to shut down the

port to which the access point is connected. If your access point

shuts down, you must remove all power and reconnect only a single

power source.

Follow these steps to connect the access point to the Ethernet LAN when you

have an inline power source:

Step 1

Connect a Category 5E (or higher) Ethernet cable to the RJ-45

Ethernet connector labeled Ethernet on the access point.

Step 2

Step 2 Connect the other end of the Ethernet cable to one of the

following:

Quick Start Guide: Cisco Aironet 1250 Series Access Point