- ページ 5

デジタルカメラ Sony odyssey 7Q+のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Sony odyssey 7Q+ 8 ページ。

Sony

Odyssey Configuration

1. SET ODYSSEY TO HD->HD APPLE PRORES MODE

HD RECORDING

☼ » SETUP » CAMERA » SONY » HD->HD PRORES(.MOV)

UHD TO HD RECORDING (ODYSSEY7Q+)

☼ » SETUP » CAMERA » SONY » 4K/UHD PRORES(.MOV)

4K RECORDING (ODYSSEY7Q+)

☼ » SETUP » CAMERA » SONY » UHD HDMI TO HD PRORES(.MOV)

2. MAKE A7S THE RECORD TRIGGER

☼ » SETUP » RECORD TRIGGER » CAMERA

3. SET TIMECODE SOURCE

☼ » SETUP » TIMECODE SOURCE » SDI/HDMI

The HDMI input is automatically detected when connected to the Odyssey.

** Note the HDMI input is on the right side of the unit, on the Odyssey7Q+ but is at the bottom of

the unit for Odyssey7 and 7Q.

4. SET PRORES BITRATE

☼ » SETUP » VIDEO CODEC »

PRORES HQ

PRORES 422

PRORES LT

5. FORMAT SSDs

☼ » ODYSSEY » SSD'S » FORMAT BOTH

(or FORMAT SSD1 if you do not have a second SSD drive installed.)

Convergent-Design.com

(SELECT)

The Apple ProRes 422 (HQ) codec offers the utmost possible quality for 4:2:2 or 4:2:0 sources

(without an alpha channel) and provides the following:

•

Target data rate of approximately 220 Mbps (1920 x 1080 at 60i)

•

Higher quality than Apple ProRes 422

The Apple ProRes 422 codec provides the following:

•

Target data rate of approximately 145 Mbps (1920 x 1080 at 60i)

•

Higher quality than Apple ProRes 422 (LT)

The Apple ProRes 422 (LT) codec provides the following:

•

Roughly 70 percent of the data rate of Apple ProRes 422 (smaller file sizes than ProRes 422)

•

Higher quality than Apple ProRes 422 (Proxy)

[5]