- ページ 2

デジタルカメラ Sony PlayStation PortableのPDF 修理と部品をオンラインで閲覧またはダウンロードできます。Sony PlayStation Portable 3 ページ。 Screen replacement guide
Sony PlayStation Portable にも：安全性とサポート (28 ページ), クイック・リファレンス (33 ページ), 取扱説明書 (24 ページ), ユーザーマニュアル (24 ページ), 取扱説明書 (20 ページ), 取扱説明書 (24 ページ), 取扱説明書 (40 ページ), 取扱説明書 (21 ページ), 取扱説明書 (16 ページ), クイック・スタート・マニュアル (15 ページ), 安全マニュアル (12 ページ), 取扱説明書 (4 ページ), クイック・リファレンス (34 ページ), 取扱説明書 (2 ページ), 取扱説明書 (2 ページ), 安全マニュアル (25 ページ)

Stage Two: Accessing the Screen

The Screen is protected by the lower button circuit which has to be removed in order to access the screen below.

Start by un-hooking the circuit from the connector on the action button circuit board, this is a delicate operation as the latch

is fragile and can snap easily.

Once removed, you can un-hook the lower button circuit by levering it off on the upper left side using a fingernail.

You should now be able to access the screen.

Do not take the lower button circuit off its metal mounting frame, although not a fatal error, this causes difficulties when

reassembling the PSP as you have to re-align the circuit with the buttons.

Stage Three: Removing the Screen

The Screen is attached to a frame by four small catches, these have to be released by carefully applying pressure to the

catch whilst lifting the screen upwards. Do not under any circumstance bend the frame, as this will cause problems when

fitting the new screen.

Once all four catches are loose, lift the screen out carefully and you should find that it is attached to the main board by two

clamp bars (the screen connector and backlight). As with the lower button circuit, be careful when lifting the brown clamps

as these are delicate. Then once removed, give the connectors a quick clean with the air duster.