デジタルカメラ Sony PXW-FS7のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony PXW-FS7 1 ページ。 Getting s-log output
Sony PXW-FS7 にも： 更新マニュアル (13 ページ), マニュアル (28 ページ), マニュアル (36 ページ), マニュアル (2 ページ), マニュアル (10 ページ)
ページを印刷する
This document describes what is required to get 4K out of the Sony PXF-FS7 through HDMI on the PIX-E
monitors. Several things are necessary and should be completed in the following order:
• The recording format must be set to a 4K-capable format.
• The HDMI Output must be set appropriately.
Setting the Recording Format
To set the PXW-FS7's recording format:
1. Turn the camera on.
2. Press the MENU button on the camera.
3. Select System > Rec Format > Video Format.
4. Set the value to one of the following:
• 4096x2160 29.97p
• 4096x2160 23.98p
• 3840x2160 29.97p
• 3840x2160 23.98p
Note: These rates assume that System > Country is set to NTSC area. When set to PAL area, 25p
rates are available. The 59.94 4K rate is not supported by PIX-E monitors.
Setting up HDMI Recording Output
Properly setting up HDMI recording output requires adjustments to the audio output and multiple video
settings.
To set up HDMI recording output:
1. Turn the camera on.
2. Press the MENU button on the camera.
3. Select Video > Output On/Off > HDMI, and set the value to ON.
4. Select Video > Output Format, and set the value to either 4096x2160p or 3840x2160p.
5. Select Video > Monitor LUT > HDMI, and set the value to MLUT OFF. This setting ensures no lookup
table is applied to the recording.
6. Select Video > Output Display, and set the value to OFF. This turns off the on-screen display from the
HDMI out.
7. Select Audio > Audio Output > HDMI Output Ch, and set the value to either CH1/CH2 or CH3/Ch4.
1
Customer Support
Email:
Sony is a registered trademark of Sony Electronics, Inc. The wave logo is a registered trademark of Sound Devices, LLC.
Getting 4K Output from
a Sony
PXW-FS7 Camera
®
www.sounddevice.com/support
| Phone: +1-608-524-0625 | Toll Free (US only): 800-505-0625
| http://forum.sounddevices.com
Published: 7/24/2015