do not use canned air on shredder. Never use aerosol, petroleum based or
other flammable products on or near shredder.
do not insert staples into opening. shredding staples may result with seri-
ous damages.
iNsTaLLaTiON:
•
Unpack and set machine upright.
•
Take the machine by the holdings on each side and put it onto the horizontal surface.
•
Plug in the machine. see „TEchNicaL daTa" for necessary precautions.
•
The socket-outlet shall be installed near the equipment and shall be easily accessible.
ParTs aND FUNcTiON
Operation button:
reverse (rev),
OFF
aUTO
Paper entry
Bin
OPEraTiON
FEEDiNG THE PaPEr
1. Please check the voltage of your shredders carefully before using and then plug in.
2. set to (aUTO) , the shredder is going to standby.
3. Feed the paper into the paper entry and the machine will start automatically.
4. The machine switches off automatically after shredding
caUTiON:
it is forbidden to place more sheets of paper then the maximum amount indicated by the
producer. if the machine will be overloaded, then please proceed according to the infor-
mation given in the "paper jam" section.
it is forbidden to shred copy paper for needle printers, soft PcV foil, glossy paper and card-
board - it may cause severe damage to the cutting mechanism.
© arGO s.a.
EN
9
www.argo.pl