- ページ 5
デジタルカメラ Sony XC-ST50のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Sony XC-ST50 31 ページ。 Black-and-white video camera module
Sony XC-ST50 にも： 仕様 (4 ページ), 製品マニュアル (2 ページ), テクニカル・マニュアル (30 ページ), テクニカル・マニュアル (31 ページ), マニュアル (4 ページ)
ページを印刷する
MAIN SPECIFICATIONS
Image pickup device
XC-ST50/50CE:
1/2-inch interline transfer CCD
XC-ST30/30CE:
1/3-inch interline transfer CCD
Number of effective pixels
XC-ST50/ST30:
768(H) x 494(V)
XC-ST50CE/ST30CE: 752(H) x 582(V)
CCD horizontal driving frequency
XC-ST50/ST30:
14.318 MHz
XC-ST50CE/ST30CE: 14.187 MHz
CCD vertical driving frequency
XC-ST50/ST30:
15.734 kHz
XC-ST50CE/ST30CE: 15.625 kHz
Signal system
EIA/CCIR
Cell size
XC-ST50:
8.4(H) x 9.8(V) um
XC-ST50CE:
8.6(H) x 8.3(V) um
XC-ST30:
6.35(H) x7.4(V) um
XC-ST30CE:
6.5(H) x6.25(V) um
Lens mount
C mount
Flange back
17.526 mm
Synchronization system
Internal/external
(Selected automatically)
External sync input/output
HD/VD (2 to 5 Vp-p)
VS (Sync level: 0.3 Vp-p
*
Allowable frequency deviation of external synchronization
(in horizontal synchronous frequency)
Jitter
Scanning system
2:1 interlaced
Non-interlaced
(during external sync input)
Horizontal resolution
XC-ST50/ST30:
570 TV lines
XC-ST50CE/ST30CE: 560 TV lines
Sensitivity
XC/ST50/50CE:
400 lx F8 (r=ON,0 dB)
XC/ST30/30CE:
400 lx F5.6 (r=ON,0 dB)
S/N ratio
XC-ST50/50CE:
60 dB/58dB
XC-ST30/30CE:
56 dB/54dB
Minimum illuminance
0.3 lx (F1.4, AGC ON)
+0.3V
–0.15 V
Automatically selected according
to the existence of an input signal
when the selection switch on the
rear panel is set to EXT.
1 %
Within
50 nsec
Gain
Gamma correction
Electronic shutter
XC-ST50/ST30:
XC-ST50CE/ST30CE: 1/120 to 1/10,000 seconds
External trigger shutter
XC-ST50/ST30:
XC-ST50CE/ST30CE: 1/4 to 1/8,000 seconds
Set using the DIP switch on the rear panel, or
*
continuously variable with the trigger pulse width.
Supply voltage
Power consumption
Operating temperature
Storage temperature
Performance assurance temperature
Operating humidity
Storage humidity
Vibration resistance
)
Shock resistance
Outside dimensions
Weight
Standards
Other
Accessories
External synchronization for each mode
Mode
Normal
Normal shutter
Mode 1
Mode 2
Restart Reset
AGC/Manual/Fixed
(Can be selected using the
switch on the rear panel.)
ON/OFF
(Can be selected using the
switch on the rear panel.)
1/100 to 1/10,000 seconds
1/4 to 1/10,000 seconds
+12 VDC (+10.5 V to 15V)
XC-ST50/50CE: 2.0 W
XC-ST30/30CE: 1.9 W
–5 ˚C to +45 ˚C
–30 ˚C to +60 ˚C
0 ˚C to +40 ˚C
20 to 80 % (Non-condensing)
20 to 95 % (Non-condensing)
10G
(For 20 minutes in the X, Y, and
Z directions at 20 to 200 Hz)
70G
44(W) x 29(H) x 57.5(D) mm
110 g
UL1492, FCC Class A Digital
Device, and CE (EN50081-2 +
EN50082-2)
Restart Reset function
Frame or field integration can be
selected.
Conforms to new 12-pin EIAJ
assignment.
Lens mount cap (1)
Instruction Manual (1)
External sync
Internal sync
HD/VD
Trigger signal
generates an
internal VD
(single) signal.
: Can be used.
: Cannot be used.
XC-ST50/50CE
XC-ST30/30CE
VS
3