- ページ 37

デジタルカメラ Sony XCU-CG160のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Sony XCU-CG160 45 ページ。 Digital video camera module

ページを印刷する

Category (

) / Sub category (

Feature

GainDigitalGreen

GainDigitalBlue

GainAuto

GainAutoLevel

GainAutoSpeed

GainAutoLowerLimit

GainAutoUpperLimit

BlackLevel

BalanceWhiteAuto

SpatialFilterEnable

SpatialFilterValueSelector

SpatialFilterValue

ColorTransformationEnable

ColorTransformationValueSelector

ColorTransformationValue

LUTControl

LUTEnable

LUTFormat

BinarizationThreshold

LinearInterpolationIndex

LinearInterpolationInValue

LinearInterpolationOutValue

LinearInterpolationBuild

LUTIndex

LUTValue

LUTValueSave

DigitalIOControl

LineSelector

LineMode

LineSource

LineInverter

LineStatus

*1 RO: Read only, WO: Write only, RW: Read/Write

*2 Color cameras are RO.

*3 Target models: Color cameras

*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.

*5 Target camera mode: NORMAL

)

Read/

Write

Description

Digital gain for the green channel.

Digital gain for the blue channel.

Sets automatic gain control (AGC) mode.

Sets the target level for Gain Auto and Exposure Auto mode. 15

Sets the automatic gain speed.

Sets the lower limit for the gain auto control.

Sets the upper limit for the gain auto control.

Controls the analog black level as an absolute physical value. –

Controls the mode for automatic white balancing between

the color channels.

Activates the 3×3 spatial filter.

Selects which physical line (or pin) of the external device

connector to control.

Controls the selected parameter for 3×3 spatial filter. 256

means ×1.0.

Activates the color transformation filter.

Selects which physical line (or pin) of the external device

connector to control.

Controls the selected parameter for color transformation

filter. 256 means ×1.0.

Category that includes LUT control features.

Activates the selected LUT.

Selects which LUT format is controlled among the various

LUT formats.

Controls the binarization threshold (12 bits).

Selects the index point to build a linear interpolation LUT.

Specifies the In value of the point selected by

LinearInterpolationIndex.

Specifies the Out value of the point selected by

LinearInterpolationIndex.

Builds a linear interpolation LUT.

Controls the index (offset) of the coefficient to access in the

selected LUT.

Returns the value at entry LUTIndex of the LUT selected by

LUTSelector.

Saves the value of the LUT to flash memory.

Category that contains the digital input and output

control features.

Selects the physical line (or pin) of the external device

connector or the virtual line of the Transport Layer to

configure.

Controls if the physical line is used to input or output a

signal.

Selects which internal acquisition or I/O source signal to

output on the selected line.

Controls the inversion of the signal of the selected input or

output line.

Returns the current status of the selected input or output line. 28

See

page

–