- ページ 18
ステレオシステム Sony CMT-CQ1 - Micro Hi Fi Component SystemのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony CMT-CQ1 - Micro Hi Fi Component System 24 ページ。 Using cd power manage function
Sony CMT-CQ1 - Micro Hi Fi Component System にも： 補足マニュアル (1 ページ)
ページを印刷する
Note on CD-R/CD-RW playback
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt, recording
condition or the drive's characteristics. Besides, the
discs, which are not yet finalized at the end of
recording, cannot be played back.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard. Recently,
various music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.
GB
18
Specifications
Main unit
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from 120 -
10,000 Hz; rated 10 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
North American model:
Continuous RMS power output (reference):
European and Australian models:
DIN power output (rated): 8 + 8 W
Continuous RMS power output (reference):
Music power output (reference):
Other models:
The following measured at AC 220 V, 50/60 Hz
DIN power output (rated): 8 + 8 W
Continuous RMS power output (reference):
The following measured at AC 240 V, 50/60 Hz
DIN power output (rated): 8 + 8 W
Continuous RMS power output (reference):
10 + 10 W
(6 ohms at 1 kHz, 10%
THD)
(6 ohms at 1 kHz, DIN)
10 + 10 W
(6 ohms at 1 kHz, 10%
THD)
20 + 20 W
(6 ohms at 1 kHz, DIN)
12 + 12 W
(6 ohms at 1 kHz, 10%
THD)
(6 ohms at 1 kHz, DIN)
10 + 10 W
(6 ohms at 1 kHz, 10%
THD)