ページを印刷するTape Deck
The tape does not record.
• The tab has been removed from the cassette (see
"To save a tape permanently" on page 41).
• The tape has reeled to the end.
The tape does not record nor play, or there is a
decrease in sound level.
• The heads are dirty (see "Cleaning the tape
heads" on page 41).
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 41).
The tape does not erase completely.
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 41).
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty (see
"Cleaning the tape heads" on page 41).
Noise increases or the high frequencies are erased.
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 41).
Tuner
Severe hum or noise ("TUNED" or "STEREO"
flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect the
external antenna.
A stereo FM program cannot be received in stereo.
• Press STEREO/MONO so that "STEREO"
disappears.
If other troubles not described above
occur, reset the system as follows:
1
Press c/CLOCK SET, TUNER ENTER
and ?/1 at the same time.
2
Unplug the power cord.
3
Plug the power cord back in.
4
Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings you made are cleared.
Messages
VIDEO CD/CD
CANNOT EDIT
• You tried to use Tape Select Edit for discs
containing over 20 tracks.
CANNOT USE
• You pressed an invalid button.
NO STEP
• You have cleared all the tracks you programmed.
OVER
• You have reached the end of the CD. Press m.
• The end of the MP3 file has been reached during
a search.
PUSH STOP
• You pressed PLAY MODE during play.
STEP FULL
• You tried to program 26 or more tracks (steps).
TOC READING
• The system is reading the TOC information of
the disc. Some buttons are not available.
GB
39