ページを印刷するWaking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see "Setting the clock" on page 9).
1
Prepare the music source you want to
play.
• VIDEO CD/CD: Load a VIDEO CD/CD.
To start from a specific track, make a
program (see "Programming the VIDEO
CD/CD tracks" on page 14).
• Tape: Load a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you
want (see "Presetting radio stations" on
page 18).
2
Adjust the volume.
3
Press c/CLOCK SET (or CLOCK/TIMER
SET on the remote).
"SET" appears and "DAILY SET" flashes
in the display.
4
Press ENTER.
"ON" appears and the hour digits flash in
the display.
5
Set the time to start playback.
Press R/r repeatedly to set the hour, then
press ENTER.
The minute indication starts flashing.
Press R/r repeatedly to set the minute, then
press ENTER.
6
Set the time to stop playback following
the above procedure.
7
Press R/r repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER.
The start time, stop time, and the music
source appear, then the original display
appears.
9
Turn off the system.
To
Do this
Check the setting
Press TIMER SELECT (or
CLOCK/TIMER SELECT
on the remote). Press R/r to
select "DAILY SELECT."
Then, press ENTER.
Change the setting
Start from step 1.
Cancel the timer
Press TIMER SELECT (or
operation
CLOCK/TIMER SELECT
on the remote). Press R/r to
select "TIMER OFF."
Then, press ENTER.
Notes
• When you use the Sleep Timer, Daily Timer will
not turn on the system until the Sleep Timer turns it
off.
• You cannot activate the Daily Timer and the
recording timer at the same time.
Tip
The power turns on 15 seconds before the preset time.
GB
27