- ページ 28
ステレオシステム Sony MEX-N4100BTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MEX-N4100BT 38 ページ。 Bluetooth audio system
ページを印刷する
F:\0918\4548379111\4548379111MEXN5100BTUC\01GB-MEXN5100BTUC\040CD.fm
010COV.book Page 28 Thursday, September 18, 2014 10:49 AM
Siri Eyes Free is not activated.
Perform the handsfree registration for an iPhone
that supports Siri Eyes Free.
Set the Siri function on the iPhone to on.
Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
SongPal operation
Application name is mismatched with the actual
application in "SongPal".
Launch the application again from the "SongPal"
application.
While running the "SongPal" application via
BLUETOOTH, the display automatically switches
to [BT AUDIO].
The "SongPal" application or BLUETOOTH
function has failed.
Run the application again.
While running the "SongPal" application, the
display automatically switches to [IPD].
The source of the unit automatically switches to
[IPD] when an iPhone/iPod is connected to the
USB port.
Make the BLUETOOTH connection and launch
the "SongPal" application again.
Pandora® operation
Pandora® connection is not possible.
Shut down the Pandora® application on the
mobile device, and then launch it again.
Error displays/Messages
CD ERROR: The disc cannot be played. The disc will
be ejected automatically.
Clean or insert the disc correctly, or make sure the
disc is not blank or defective.
CD NO MUSIC: There is no playable file. The disc
will be ejected automatically.
Insert a disc or connect a USB device containing
playable files (page 24).
CD PUSH EJT: The disc could not be ejected
properly.
Press (eject).
HUB NO SUPRT: USB hubs are not supported.
IPD STOP: iPod playback has finished.
Operate your iPod/iPhone to start playback.
NO DEV: A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
connected.
28
GB
OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press SRC to
select another source.
The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the disc structure.
RESET: The unit cannot be operated due to the
problem.
Press RESET (page 7).
USB ERROR: The USB device cannot be played.
Connect the USB device again.
USB NO SUPRT: The USB device is not supported.
For details on the compatibility of your USB
device, visit the support site on the back cover.
or
the end of the disc has been reached.
: The character cannot be displayed.
For BLUETOOTH function:
BT BUSY: The BLUETOOTH device is busy.
Wait for a while, then try again.
ERROR: The selected operation could not be
performed.
Wait for a while, then try again.
MEMORY BUSY: Now storing data.
Wait for a while, then try again.
NO DEV: The BLUETOOTH device is not connected
or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
P EMPTY: No phone numbers are stored.
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
For SongPal operation:
APP DISCNCT: The application is disconnected.
Make the "SongPal" connection (page 16).
MEX-N5100BT/MEX-N4100BT
masterpage: Left
: The beginning or
4-548-379-11(1)