- ページ 7

ステレオシステム Sony MEX-N4150BTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MEX-N4150BT 36 ページ。 Bluetooth audio system

ページを印刷する

Resetting the unit

Before operating the unit for the first time, after

replacing the car battery, or changing the

connections, you must reset the unit. Press RESET

on the inner panel with a ball-point pen, etc., after

detaching the front panel.

Note

Pressing RESET will erase the clock setting and some

stored contents.

Switching the FM/AM Tuning

Step

Set the FM/AM tuning step of your country. This

setting appears only while the source is off and

the clock is displayed.

Press MENU, rotate the control dial to

select [SET GENERAL], then press it.

Rotate the control dial to select [SET

TUNER-STP], then press it.

Rotate the control dial to select from [SET

50K/9K], [SET 100K/10K] or [SET 200K/

10K], then press it.

Setting the Clock

Press MENU, rotate the control dial to

select [SET GENERAL], then press it.

Rotate the control dial to select [SET

CLOCK-ADJ], then press it.

The hour indication flashes.

Rotate the control dial to set the hour

and minute.

To move the digital indication, press SEEK +/–.

After setting the minute, press MENU.

The setup is complete and the clock starts.

To display the clock

Press DSPL.

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling

depending on the BLUETOOTH compatible device

such as a smartphone, cellular phone and audio

device (hereafter "BLUETOOTH device" if not

otherwise specified). For details on connecting,

refer to the operating instructions supplied with the

device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

Connecting with a Smartphone by One

touch (NFC)

By touching the control dial on the unit with an

NFC* compatible smartphone, the unit is paired and

connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

between various devices, such as mobile phones and

IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

touching the relevant symbol or designated location

on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower

installed, downloading the app "NFC Easy Connect"

available at Google Play™ is required. The app may

not be downloadable in some countries/regions.

Activate the NFC function on the

smartphone.

For details, refer to the operating instructions

supplied with the smartphone.

Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that

lights up on the display of the

unit.

To disconnect by One touch

Touch the N-Mark part of the unit with the N-Mark

part of the smartphone again.

Notes

 When making the connection, handle the

smartphone carefully to prevent scratches.

 One touch connection is not possible when the unit is

already connected to another NFC compatible device.

In this case, disconnect the other device, and make

connection with the smartphone again.