- ページ 21

ネットワーク・ハードウェア Cisco ASA 5508-XのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASA 5508-X 32 ページ。 Threat defense reimage guide
Cisco ASA 5508-X にも：クイック・スタート・マニュアル (8 ページ), 簡単セットアップマニュアル (11 ページ), クイック・スタート・マニュアル (9 ページ), ソフトウェアマニュアル (37 ページ), マウント＆コネクト (6 ページ), マニュアル (14 ページ)

Installation Preparation

This chapter prepares you to install your ASA, and contains the following sections:

•

Be sure to read the

Take note of the following warnings:

Warning

Read the installation instructions before connecting the system to the power source.

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect

Warning

the power at the circuit breaker on DC units.

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,

Warning

and watches). Metal objects will heat up when connected to power and ground and can cause serious burns

or weld the metal object to the terminals.

Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly

touch the backplane with your hand or any metal tool, or you could shock yourself.

Warning

This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.

Install only in accordance with national and local wiring regulations.

Online Only

Installation Warnings, page 17

Safety Recommendations, page 18

Site Environment , page 19

Regulatory Compliance and Safety Information

C H A P T E R

document before installing the ASA.

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide