- ページ 39

ステレオシステム Sony MHC-DX3のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MHC-DX3 48 ページ。 Mini hi-fi component system
Sony MHC-DX3 にも：取扱説明書 (49 ページ)

Connecting an MD deck

for listening to music

Make sure to match the color of the plugs and

the connectors. To listen to the sound of the

connected MD deck, press MD (VIDEO).

To the audio output of the

MD deck

Tip

When you connect a Sony MD deck, you can use the

MD H, S, and s buttons on this unit's remote to

perform play, pause, and stop operations.

Note

If you cannot select "MD" when you press MD

(VIDEO), press ?/1 while pressing MD (VIDEO)

when the power is turned off. "VIDEO" will be

switched to "MD". To return to "VIDEO", do the

same procedure. However, you cannot switch from

MD to VIDEO or from VIDEO to MD when the

system is in the Power Saving Mode (see page 9).

Connecting a VCR

By connecting the audio output jacks of your

VCR to the MD/VIDEO (AUDIO) IN jacks

using an optional audio cable, you can enjoy

video playback in powerful stereo sound.

Make sure to match the color of the plugs and

the connectors. To listen to the sound of the

connected VCR, hold down MD (VIDEO) and

press ?/1 when the power is turned off. This

switches the "MD" function to "VIDEO".

Once you enable the "VIDEO" function, just

press MD (VIDEO).

To the audio output of the video deck

Notes

• You cannot switch from MD to VIDEO or from

VIDEO to MD when the system is in the Power

Saving Mode (see page 9).

• To return to "MD", press ?/1 while pressing MD

(VIDEO) again when the power is turned off.

• When you connect a VIDEO CD deck, set to

"MD".