- ページ 13
ステレオシステム Sony MHC-EC719iPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MHC-EC719iP 32 ページ。
Sony MHC-EC719iP にも: サービスマニュアル (42 ページ)
Tuner
Listening to the radio
1
Select the FM function.
Press FM.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until "AUTO" appears, and then
press TUNING+/TUNING. Scanning
stops automatically when a station
is found.
If the scanning does not stop, press
to stop scanning, then perform
manual tuning (below).
For manual tuning
Press TUNING MODE repeatedly
until "MANUAL" appears, and
then press TUNING+/TUNING
repeatedly to tune to the desired
station.
When you tune to a station that
provides RDS services, the station
name appears on the display
(European model only).
Tip
To reduce static noise on a weak FM
stereo station, press FM MODE repeatedly
until "MONO" appears to turn off stereo
reception. You will lose stereo effect, but
reception will improve.
Presetting radio stations
1
Tune to the desired station.
2
Press TUNER MEMORY to
select the tuner memory
mode.
3
Press PRESET+/PRESET
repeatedly to select the
desired preset number.
If another station is already
assigned to the selected preset
number, the station is replaced by
the new station.
4
Press
to store the station.
5
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM
stations. The preset stations are
retained for about half a day even if
you disconnect the power cord or if
a power failure occurs.
To tune to a preset radio station
If you registered a radio station to a
preset number 1 to 4, the radio station
will be tuned in by just pressing the
TUNER MEMORY NUMBER (1 to 4)
when the system function is set to FM.
If you registered a radio station
to a preset number 5 or higher,
press TUNING MODE repeatedly
until "PRESET" appears then press
PRESET+/PRESET repeatedly to
select the desired preset number.
13
GB