ページを印刷する
1
Connect a USB device to the
port on the unit.
2
Press USB.
3
Press OPTIONS on the unit when
playback is stopped.
4
Press ./> to select "MEM
SEL", then press ENTER.
5
Press ./> to select the
memory you want, then press
ENTER.
6
Start playback the audio files of the
selected memory or start
transferring.
To use the system as a battery
charger
You can use the system as a battery
charger for USB devices that have a
rechargeable function when the system is
turned on.
The charging begins when the USB
device is connected to the
unit. The charging status appears in the
USB device's display. For details, refer to
the operating instructions of your USB
device.
Note
You cannot use the system as a battery charger
when the system is turned off.
Transferring music
from a disc
You can transfer music from a disc
(AUDIO CD or MP3 disc only) to a USB
device.
You can easily transfer all the music on a
disc to a USB device (CD SYNC
Transferring). You can also transfer a
single track or MP3 file during playback
(REC1 Transferring).
The audio format of files transferred by
this system is MP3.
Note on copyright-protected
content
The transferred music is limited to private
use only. Use of the music beyond this
limit requires permission of the copyright
holders.
Notes
• When transferring from an AUDIO CD, the
tracks are transferred as 128 kbps MP3 files.
port on the
When transferring from an MP3 disc, MP3
files are transferred with the same bit rate as
the original MP3 files.
• USB transferring is disabled while the disc
tray is open.
1
Connect a USB device to the
2
Press CD.
3
Load the disc you want to
transfer.
port on the unit.
Continued
l
13
GB