ページを印刷する
2
Press
"REC BIT RATE", then press
ENTER.
3
Press
bit rate you want, then press
ENTER.
• 128 KBPS: encoded MP3 tracks have
smaller file size and lower audio
quality.
• 256 KBPS: encoded MP3 tracks have
bigger file size but higher audio
quality.
To exit the options menu, press
OPTIONS on the unit.
Transferring music from a disc
or USB device
You can easily transfer all the music on a
disc or USB A to USB B (Synchronized
Transfer). You can also transfer a single
track or audio file during playback
(REC1 Transfer).
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
below.
GB
20
/
repeatedly to select
/
repeatedly to select the
B port as shown
USB device
2
For disc:
Press CD, then load the disc.
For USB:
Press USB/USB SELECT repeatedly
until "USB A" lights up in the display
panel, then connect the USB device
containing audio files you want to
transfer to
A port.
3
For Synchronized Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode you
want.
Notes
• If you start transferring in Shuffle Play
("FLDR SHUF"), the selected play mode
changes to "FLDR" automatically.
• If you start transferring in Shuffle Play
(except "FLDR SHUF"), Repeat Play or
Program Play with no steps, the selected
play mode changes to Normal Play
automatically.
For REC1 Transfer:
Select the track or audio file you want
to transfer, then start playback.
4
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
5
Press ENTER.
The transfer starts when "DON'T
REMOVE" appears in the display
panel.
For Synchronized Transfer:
When the transfer is completed, the
transfer source and the USB device
stop automatically.
For REC1 Transfer:
When the transfer is completed, the
disc or the USB device continues to
play.