ページを印刷する
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /
system.
2
Press CLOCK/TIMER SET
If the current mode appears on
the display, press /
repeatedly to select "CLOCK SET"
and then press ENTER
3
Press /
to set the hour, and then press
ENTER
4
Use the same procedure to set
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY
clock is displayed. The clock is displayed
for about 8 seconds.
1
GB
to turn on the
.
repeatedly
.
repeatedly until the
.