ページを印刷する
6
Press ENTER.
Transferring starts when "DON'T
REMOVE" appears in the display
panel.
For CD-USB Synchronized
Transfer:
When the transferring is completed,
the disc and the USB device stop
automatically.
For REC1 Transferring:
When the transferring is completed,
the disc continues to play.
Transferring analog audio
(Analog Transferring)
You can transfer the sound from analog
audio sources (other than CD and USB
function) to a USB device.
1
Connect a transferable USB
device to the
unit (page 16).
2
Press FUNCTION repeatedly to
select the source you want to
transfer.
3
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
4
Press ENTER.
Transferring starts when "DON'T
REMOVE" appears in the display
panel.
5
Start playback the source.
To stop transferring
Press x.
B port on the
To create a new MP3 file
Press REC TO USB B.
"NEW TRACK" appears in the display
panel.
If you press REC TO USB B again after a
few seconds, a new MP3 file cannot be
created.
Note
When a new MP3 file is created, transferring is
disabled for the time being.
Tip
A new MP3 file is created automatically after
approximately 1 hour of transferring.
Transferring music from USB
device
You can easily transfer the audio files
from a USB device to another USB device
(USB A-USB B Synchronized Transfer).
You can also transfer a single audio file
during playback (USB A-USB B REC1
Transferring).
1
Connect a transferable USB
device to the
connect the USB device you
want to transfer to
2
Press USB/USB SELECT
repeatedly to select "USB A".
3
For USB A-USB B Synchronized
Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode you
want.
Note
If you start transferring in "ALL USB",
"ALL USB SHUF", "1 USB SHUF" and
Repeat Play, the play mode automatically
changes to "1 USB".
If you start transferring in "
play mode automatically changes to "
B port, then
A port.
SHUF", the
".
l
Continued
17
GB