- ページ 33

ステレオシステム Sony MHC-MG310AV - Mini Hi-fi Component SystemのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MHC-MG310AV - Mini Hi-fi Component System 40 ページ。 Sony operating instructions mini hi-fi component system mhc-mg510av,mhc-mg310av,mhc-mg110
Sony MHC-MG310AV - Mini Hi-fi Component System にも：取扱説明書 (41 ページ)

ページを印刷する

The sound from the connected source is

distorted when VIDEO function is selected.

• Select MD function. If "VIDEO" appears in the

display when you press 5.1CH/VIDEO (MD)

(for MHC-MG510AV/MG310AV) or VIDEO

(MD) (for MHC-MG110 or on the remote),

switch the function to MD (see "Hooking up the

optional A/V components" on page 28).

"- - : - -" flashes in the display.

• A power interruption occurred. Set the clock and

timer settings again.

The timer does not function.

• Set the clock correctly.

"DAILY", and "REC" do not appear when you

press TIMER SELECT.

• Set the timer correctly.

• Set the clock.

The remote does not function.

• There is an obstacle between the remote and the

system.

• The remote is not pointing in the direction of the

system's sensor.

• The batteries have run down. Replace the

batteries.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

Speakers

Sound comes from one channel or unbalanced

left and right volume.

• Connect the speaker cords properly (see page 8).

• Place the speakers as symmetrically as possible.

• Connect only one of the supplied speakers to

each set of speaker terminals.

• Connect the supplied speakers.

The sound comes from the center speaker only

(for MHC-MG510AV/MG310AV only).

• The source being played back is monaural. Press

PRO LOGIC to turn off the Dolby Pro Logic

mode.

There is no sound from the center speaker (for

MHC-MG510AV/MG310AV only).

• Connect the speaker cords properly (see page 8).

There is no sound from the rear speakers (for

MHC-MG510AV/MG310AV only).

• Connect the speaker cords properly (see page 8).

Sound lacks bass.

• Check that the speaker's + and – jacks are

connected correctly.

CD Player

The CD will not play.

• Close the front cover.

• Check if the CD is correctly loaded in the slot.

• The CD is dirty.

• The CD is loaded with the label side facing left.

• There is moisture on the CD.

Play does not start from the first track.

• The player is in Program or Shuffle Play mode.

Press PLAY MODE repeatedly until "PGM" or

"SHUF" disappears.

The sound skips.

• The CD is dirty.

• Replace the CD.

• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the system,

or placing them on separate stands.

• When you listen to a track with bass sounds at

high volume, the speaker vibration may cause the

sound to skip.

"OVER" is displayed.

• You have reached the end of the CD.

continued