- ページ 14
ステレオシステム Sony MHC-RG333のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MHC-RG333 47 ページ。 Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Sony MHC-RG333 にも： 取扱説明書 (48 ページ)
ページを印刷する
-- Program
Play
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed
tracks
onto a cassette tape (page 19).
MP3 audio tracks cannot be played on
MHC-GX250,
MHC-RG
121 and MHC-RG100.
1
Press CD (or FUNCTION repeatedly)
to
switch the function
to CD.
2
Press PLAY MODE repeatedly in stop
mode until "PGM" appears.
3
Press DISC SKIP (or DISC 1 - 3 or DISC
SKIP/EX-CHANGE
on the unit) to select
a disc,
4
Press I<1<1or _
repeatedly (or turn
Dt>_ on the unit) until the desired
track number appears.
When programming
the MP3 audio tracks,
press ALBUM
or + to select album, then
press _
or _
repeatedly
(or turn
[>1>tl on the unit) until the desired track
munber appears.
Disc tray number
Selected track number
O
Program additional tracks.
To program
Repeat steps
Other tracks on tile 4 and 5
same disc
Other tracks on
3 to 5
other discs
7
Press IP _,
Program Play starts.
Other
operations
To
Do this
Cancel Piogiam
Press PLAY MODE repeatedly
Play
m stop mode until "PGM"
disappears.
Clear a tiack from
Piess CLEAR in stop mode.
the end
Tips
• The program you made remains after Program Play
finishes To play the same proglam again press CD
(or FUNCTION repeatedly) to switch the flmetion to
CD, then press II_ However, the program is cleared
when you open the disc tray.
• "
"appears when the total CD proglam time
exceeds 100 minutes, or when you select a CD tiack
whose nmnber is 21 or over, or when you select an
MP3 audio track.
5
Total playing time(including
selected track)
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
14c8