ページを印刷するTo record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 6 of "Creating your own
program" (page 15).
Tips
• When setting the PBC function to on, change the
setting to off and then start recording.
• For MHC-RV555/RV55, if you select both sides
recording and the tape reaches the end of the front
side part-way through a track, the entire track is
recorded again from the beginning of the reverse
side.
Recording on a tape
manually
— Manual Recording
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see "Hooking up optional
components" on page 34).
Use buttons on the unit for the operation.
1
Load a recordable tape into deck B,
then press TAPE A/B repeatedly to
select deck B.
2
(MHC-RV555/RV55 only)
Press PLAY MODE repeatedly to select
"g" to record on one side. Select
"j" (or RELAY) to record on both
sides.
When you want to record from the reverse
side, press hH twice or until the TAPE
B reverse side indicator lights up. Then
press x.
3
Press one of the following buttons to
select the desired source to record.
• CD: To record from this system's CD
player.
• TAPE A/B: To record from this system's
tape deck A.
• TUNER/BAND: To record from this
system's tuner.
• GAME: To record from the connected
video game machine to GAME INPUT
AUDIO L/R jacks.
• VIDEO/SAT*: To record from the
optional component connected to
VIDEO/SAT IN L/R jacks.
* MHC-RV555/RV55 only
4
Press REC PAUSE/START.
Deck B stands by for recording.
"REC" flashes.
5
Press REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
continued
GB
23