- ページ 39

ステレオシステム Sony MHC-V11のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony MHC-V11 44 ページ。 Home audio system

ページを印刷する

On placement

• Do not place the system in an inclined

position or in locations that are extremely

hot, cold, dusty, dirty, or humid or lacking

adequate ventilation, or subject to

vibration, direct sunlight or a bright light.

• Be careful when placing the system on

surfaces that have been specially treated

(for example, wax, oil, polish) as staining

or discoloration of the surface may result.

• If the system is brought directly from a

cold to a warm location or is placed in a

very damp room, moisture may condense

on the lens inside the system, and

cause the system to malfunction. In this

situation, remove the disc, and leave the

system turned on for about an hour until

the moisture evaporates.

On heat buildup

• Heat buildup on the system during

operation is normal and is not a cause for

alarm.

• Do not touch the cabinet if it has been

used continuously at a high volume

because the cabinet may have become

hot.

• Do not obstruct the ventilation holes.

On the speaker system

The built-in speaker system is not

magnetically shielded, and the picture on

nearby TV sets may become magnetically

distorted. In this situation, turn off the TV,

wait 15 to 30 minutes, and turn it back on.

If there is no improvement, move the

system far away from the TV.

Cleaning the cabinet

Clean this system with a soft cloth slightly

moistened with a mild detergent solution.

Do not use any type of abrasive pad,

scouring powder, or solvent, such as thinner,

benzine, or alcohol.

On BLUETOOTH Communication

• BLUETOOTH devices should be used

within approximately 10 meters (33 feet)

(unobstructed distance) of each other.

The effective communication range may

become shorter under the following

conditions.

— When a person, metal object, wall

or other obstruction is between the

devices with a BLUETOOTH connection

— Locations where a wireless LAN is

installed

— Around microwave ovens that are in

use

— Locations where other electromagnetic

waves are generated

• BLUETOOTH devices and wireless LAN

(IEEE 802.11b/g) equipment use the

same frequency band (2.4 GHz). When

using your BLUETOOTH device near

a device with wireless LAN capability,

electromagnetic interference may occur.

This could result in lower data transfer

rates, noise, or inability to connect. If this

happens, try the following remedies:

— Use this system at least 10 meters

(33 feet) away from the wireless LAN

equipment.

— Turn off the power to the wireless

LAN equipment when using your

BLUETOOTH device within 10 meters

(33 feet).

— Use this system and BLUETOOTH device

as closer to each other as possible.

• The radio waves broadcast by this system

may interfere with the operation of some

medical devices. Since this interference

may result in malfunction, always turn off

the power on this system and BLUETOOTH

device in the following locations:

— In hospitals, on trains, in airplanes,

at gas stations, and any place where

flammable gases may be present

— Near automatic doors or fire alarms

• This system supports security

functions that comply with BLUETOOTH

specifications to ensure secure

connections during communication using

BLUETOOTH technology. However, this

security may be insufficient depending

on the setting contents and other factors,

so always be careful when performing

communication using BLUETOOTH

technology.

• Sony cannot be held liable in any way

for damages or other loss resulting from

information leaks during communication

using BLUETOOTH technology.

• BLUETOOTH communication is not

necessarily guaranteed with all

BLUETOOTH devices that have the same

profile as this system.