- ページ 23
ステレオシステム Sony MZ-R701のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony MZ-R701 50 ページ。 Portable memory stick audio player / portable minidisc recorder / portable cd player
Sony MZ-R701 にも： 限定保証 (1 ページ)
ページを印刷する
5-9. Mode Settings
After CD overall and MO overall adjustments are made, the fol-
lowing two modes should be set in the manual mode:
• Setting the auto time stamp mode
This mode is provided so that the auto time stamp (function that
delimits tracks at given intervals) can be turned on/off in the menu
mode.
1. Select the manual mode of the test mode, and set item number
062 (see page 12).
This set LCD display
S20
[VOL+]
2. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
S30.
This set LCD display
S30
3. Press the
key.
X
• Check method of auto time stamp mode
1. Turn the power off and then on.
2. Insert a disc and press the
time. Verify that "REC" is flashing on the LCD display and
[MENU/ENTER]
then push the
This set LCD display
EDIT
3. Press the
>
key four times.
This set LCD display
TIME MARK
[MENU/ENTER]
4. Press the
5. Verify that each time the
play changes as follows:
5min t 10min t 15min t off.
6. Verify that "OFF" is flashing on the LCD display and then
[MENU/ENTER]
press the
7. Push the
key and remove the disc.
x
• Setting the ATRAC mode
This mode is provided to set the mode of ATRAC to TYPE-R (high
tone quality mode).
1. Select the manual mode of the test mode, and set item number
867 (see page 12).
This set LCD display
S00
0 62
[VOL--]
0 62
[REC]
key and
key at the same
X
key.
00: 0 0
e
REC
00: 0 0
e
REC
key.
key is pressed, the LCD dis-
>
key.
8 67
[VOL+]
2. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
S67.
This set LCD display
S67
3. Press the
key.
X
4. Set item number 868 (see page 12).
This set LCD display
S20
[VOL+]
5. Adjust with the
key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
S01.
This set LCD display
S01
6. Press the
key.
X
5-10. Resume Clear
Perform the Resume clear when all adjustments completed.
• Resume Clear Setting Method
1. Select the manual mode of the test mode, and set item number
043 (see page 12).
This set LCD display
Resume CC
2. Press the
X
key.
This set LCD display
Res
ResClr
3. Press the
key to return to the test mode (display check
x
mode).
MZ-R701/R701DPC
[VOL--]
8 67
8 68
[VOL--]
8 68
0 43
0 43
Resume clear complete
0 43
23