- ページ 2
ステレオシステム Sony RDP-XF300iPNのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Sony RDP-XF300iPN 2 ページ。 Personal audio system
Sony RDP-XF300iPN にも： 操作説明 (2 ページ)
ページを印刷するPower indicator
Bluetooth indicator
Aerial
Supporter
Dock Connector
Docking Tray
Display
Remote sensor
VOLUME + (VOL + on the remote control) and buttons have a tactile dot.
To turn the unit on/off
Operations
Press (On/Standby).
The power indicator lights up when the unit is turned on.
How to handle an iPod
To set an iPod
Adjusting the volume
Press VOLUME +/− (VOL +/− on the remote).
Operating an iPod on the
Dock
1
Press the Docking Tray on the front of the unit to
open.
After use, close the Docking Tray by pushing it until
locked.
To remove an iPod
2
Set the iPod on the Dock Connector.
The Dock Connector can be tilted slightly.
For details, see "How to handle an iPod. "
3
Press .
4
Press iPod to activate the function for iPod.
"iPod" appears in the display.
Notes
5
Press .
An iPod in a case or cover can be set in this unit.
However, if the case or cover interferes with the
The iPod begins to play back.
connection, remove the case or cover before setting the
If the iPod does not start playing back, operate directly
iPod on the Dock Connector.
on the iPod.
When placing or removing the iPod, hold it at the same
You can operate the connected iPod via this unit or the
angle as the Dock Connector on the unit. Do not pull
the iPod forward too far.
iPod itself.
When placing or removing the iPod, hold the unit
securely.
Do not twist or bend the iPod, as this may result in
connector damage.
Remove the iPod when transporting it; otherwise, a
malfunction may result.
To
Press
Pause playback
To resume play, press
again.
Go to the next track
(forward)
Go back to the previous track
(backward)*
4
Perform the pairing procedure on the iPod to
Locate a point while listening to
(forward) or
detect the unit. Select "Settings Bluetooth" and
the sound
(backward) while
turn on the Bluetooth function.
playing and hold until
Example: iPhone 5
you find the desired
point.
Go back to the previous menu
MENU on the remote
Select a menu item or a track
(up)/ (down) on
for playback
the remote
Execute the selected menu item
ENTER on the remote
or begin playback
*
During playback, this operation returns you to the beginning of
the current track. To go back to the previous track, press twice.
Notes
If a pop-up message appears on the display of the iPod
touch, iPhone, or iPad, see "About App. "
Some operations may differ or may not be available on
some models of iPod.
If the battery of the iPod is extremely low, charge it for a
while before operation.
A list of detected devices appears on the display.
Sony cannot accept responsibility in the event that data
The unit is displayed as "RDP-XF300iPN. "
recorded to an iPod is lost or damaged when using the
If "RDP-XF300iPN" is not displayed, repeat from step
iPod connected to this unit.
For details of environmental conditions for operating an
3.
5
iPod, check the website of Apple Inc.
Select "RDP-XF300iPN" on the display of the
MENU, (up), (down), and ENTER button on the
iPod while the Bluetooth indicator flashes
main unit and/or on the supplied remote control will
quickly.
only work with the Apple devices (iPhone/iPad/iPod
touch) installed up to iOS 6. It will not work with iOS 7
When "Connected" appears on the display of the iPod,
or later. In such case, please operate on the screen of
pairing and connection are complete.
Apple devices directly.
Example: iPhone 5
To remove the iPod
For details, see "How to handle an iPod. "
To charge an iPod
You can use the unit as a battery charger for an iPod when
the power is supplied by the AC adaptor.
Charging begins when the iPod is connected to the unit.
The charging status appears in the display on the iPod. For
details, refer to the user's guide of the iPod.
Tips for charging an iPod with the rechargeable
battery
With the function for iPod activated, if the battery
indicator is level 1 or 2, charging will start. If the battery
indicator is level 3 or 4, to start charging, press and hold
iPod. (For details, see "To use the rechargeable battery. " )
Notes
Charging will terminate when the unit turns off
The operation and display may differ depending on the
automatically. (For details, see "Auto power off. " )
model of iPod and/or software version. For details, refer
To terminate charging, press and hold iPod. This
to the user's guide of the iPod.
operation will terminate playback. To restart charging,
Pairing mode is canceled after about 5 minutes. If
press and hold iPod again.
pairing mode is canceled halfway, start over from step 3.
If pairing is not complete, start over from step 3.
To pair with another iPod, repeat steps 1 to 5.
Operating by wireless
In step 3, if a double-beep sound is not heard or the
Bluetooth indicator does not flash quickly, press and
music streaming
hold BLUETOOTH (
on the remote) again.
If you turn off the unit or the iPod before the Bluetooth
By using the Bluetooth connection, you can listen to the
connection is complete, pairing information will not be
sound from an iPod or other Bluetooth device with the
memorized, and pairing will not be completed.
unit wirelessly.
Notes on pairing with a Bluetooth device other than
iPod
When pairing with a Bluetooth device other than iPod,
after step 3, pass code input may be required in your
Bluetooth device. In this case, input "0000. "
The operation and display may differ depending on the
Bluetooth device and/or software version. For details,
refer to the user's guide of the Bluetooth device.
To listen to sound
Keep the iPod and the unit within 10 meters of each other
for this operation.
Pairing
Check the following before operating the unit.
What is pairing?
The Bluetooth function of the iPod is on.
Pairing of the unit and the iPod is complete. If pairing is
Bluetooth devices need to be "paired" with each other
beforehand.
not completed, perform pairing again. (See "To pair with
an iPod. " )
Once Bluetooth devices are paired, there is no need for
1
pairing again, unless pairing information is deleted.
Press .
2
Press BLUETOOTH ( on the remote) to turn on
Bluetooth indicator
the Bluetooth function.
Status
Bluetooth indicator
The last connected iPod will be reconnected
(blue)
automatically when the Bluetooth function is turned
Bluetooth off
Off
on.
Bluetooth on but not
Flashes slowly
3
Select your desired music, video, game, etc., to
connected
play on the iPod. For details, refer to the user's
Pairing mode
Flashes quickly
guide of the iPod.
Connected or communicating
Lights up
Tips
If the last connected iPod does not reconnect
To pair with an iPod
automatically, press BLUETOOTH (
it still does not reconnect, select the model name of this
Keep the iPod and the unit within 1 meter of each other for
unit from the iPod. (Perform steps 4 to 5 in "To pair
this operation.
with an iPod. " )
1
Press .
To connect an alternative iPod, which has previously
2
Press BLUETOOTH ( on the remote) to turn on
been paired with this unit, press BLUETOOTH (
the Bluetooth function when the Bluetooth
the remote) to disconnect the currently connected iPod.
indicator is off.
Then select the model name of the unit from the
alternative iPod you want to connect.
"Bluetooth" appears in the display.
While listening to music from an iPod via Bluetooth
The Bluetooth indicator flashes slowly.
connection, you can charge the iPod on the Dock only if
3
Press and hold BLUETOOTH ( on the remote).
the AC adaptor is connected.
When pairing starts, a double-beep sound will be heard
If the volume level is low, adjust the volume of the unit
first. If the volume is still too low, adjust the volume of
and the Bluetooth indicator will flash quickly.
the Bluetooth device.
Pairing mode of the unit is activated.
To finish listening
Terminate the Bluetooth connection by any of the
following operations.
Turn off the unit.
3
Press
Turn off the iPod.
number, and press .
Press BLUETOOTH (
on the remote), iPod, FM or
The preset number flashes, then, the frequency digits
AUDIO IN.
Operate the iPod to terminate the connection. For
show in the display.
details, refer to the user's guide of the iPod.
The new station replaces the old one.
To clear the list of models already-
Tip
paired and memorized in the unit
To go back to the previous status, press FM instead of
in step 3.
1
Press .
2
To play preset radio stations
Press BLUETOOTH ( on the remote) to turn on
Press
the Bluetooth function.
If "FREQ. TUNE" appears, press and hold FM again.
3
Press and hold BLUETOOTH and VOLUME − at
the same time on the unit.
"CLEAR" appears in the display.
Notes
You can perform step 3 to clear the list even during
Bluetooth connection.
Connecting optional
This operation cannot be performed when the unit is
pairing.
components
To pair with this unit again, delete the model name of
this unit from the iPod and perform pairing again. (See
You can enjoy the sound from an optional component,
"To pair with an iPod. " )
such as a portable digital music player, through the
speakers of this unit. Be sure to turn off the power of each
component before making any connections.
Operating the radio
1
Firmly connect the line output jack of the
1
portable digital music player (or other
Press .
2
component) to the AUDIO IN jack on the back of
Press FM to activate the radio function.
the unit, using a suitable audio connecting cable
"FM" appears in the display.
(not supplied).
2
Press to turn on the unit.
3
Press AUDIO IN to activate the Audio-in
function.
Frequency digits appear in the display after a short
"AUDIO IN" appears in the display.
period.
4
Turn the connected component on.
3
Press and hold FM until "FREQ. TUNE" appears
5
Play the connected component.
in the display.
The sound from the connected component is output
If "PRESET TUNE" appears, press and hold FM again.
from the speakers of this unit.
When using the remote to operate the unit, you can
Notes
skip this step, and directly operate step 4.
The necessary type of audio connecting cable depends
4
Press and hold TUNE + or − until the frequency
on the optional component. Be sure to use the correct
digits begin to change in the display.
type of cable.
If the volume level is low, adjust the volume of the unit
The unit automatically scans the radio frequencies and
first. If the volume is still too low, adjust the volume of
stops when it finds a clear station.
the connected component.
If you cannot tune in a station, press TUNE + or −
repeatedly to change the frequency step-by-step.
Other useful functions
When an FM stereo broadcast is received, "STEREO"
appears.
Power Off Hold function
You can set the Power Off Hold function to avoid
unintentionally powering on while carrying the unit.
To set the Power Off Hold function
Tips
If you touch or operate an iPod connected to this unit
Remove the iPod from the Dock Connector, and then press
while listening to the radio, noise may occur. Avoid
and hold on the unit when the AC adaptor is
touching or operating the iPod in this case.
disconnected.
If you are listening to the radio with an iPhone
"HOLD" flashes twice and the display turns off. The unit
connected to the unit, interference with radio reception
cannot be turned on by pressing while the Power Off
may occur. Remove the iPhone in this case.
Hold function is set.
To improve the reception
To cancel the Power Off Hold
Extend the aerial to its full length and adjust the angle for
function
best reception.
Press and hold on the unit.
"RELEASE" flashes twice and the Power Off Hold function
is canceled. The unit will turn on automatically.
Tip
The Power Off Hold function will be canceled if you
connect the AC adaptor to the unit or set an iPod on the
Dock Connector.
Note
Adjust the direction of the aerial by holding the bottom
Selecting audio emphasis
of it. The aerial can be damaged if you move the aerial
with excessive force.
(equalization)
To set monaural sound if stereo
You can adjust the emphasis of the sound.
reception is poor
Press
SOUND
The unit automatically switches between stereo and
emphasis.
monaural output, depending on reception conditions.
However, if stereo reception is unstable, you can manually
set for monaural output to improve the sound.
Press FM to show "MONO" in the display. (To resume
stereo reception, press FM again to show "STEREO" in the
display.)
To preset radio stations
You can preset up to 20 radio stations in the unit's memory.
1
Press FM to activate the radio function.
2
Press and hold until "AUTO PRESET"
on the remote). If
appears in the display.
on
3
Press .
The stations are stored in memory from the lower
frequencies to the higher ones automatically.
Tip
To go back to the previous status, press FM instead of
in step 3.
About App
If a station cannot be preset automatically
You may need to preset a station with a weak signal manually.
A dedicated Dock App for iPod touch/iPhone/iPad
1
Tune in the station you want.
available at Apple App Store.
2
Press .
Search for "D-Sappli" and download the free App to find
out more about the functions.
Features
D-Sappli includes various timer functions: Alarm, Music
Play Timer and Sleep Timer.
You can set up to 10 alarms, using songs in iPod or
or
to select the desired preset
Preset Sound in D-Sappli for the alarm sound.
Music Play Timer allows you to play/pause desired
music at a desired time. Sleep Timer allows you to
specify a time at which to stop music playback. Alarm,
Music Play Timer and Sleep Timer work in combination
with the power supply of the unit.
Alarm, Music Play Timer and Sleep Timer are available
only when D-Sappli is activated.
D-Sappli can display a list of Radio Preset Stations
programmed in this unit.
You can rename the Radio Preset Stations, and change
their preset numbers on the D-Sappli. Preset numbers
or
to tune in a stored station.
and order will also be changed accordingly in the unit.
D-Sappli also includes a clock display enlarge feature.
Notes
If the App to link with this unit is not downloaded to the
iPod touch/iPhone/iPad, a pop-up message prompting
you to download D-Sappli may appear repeatedly.
Deactivate the App's link function to stop the pop-up
message.
To deactivate the App's link function: Connect the AC
adaptor, and then press / to turn off the unit. Remove
the iPod touch/iPhone/iPad from the Dock Connector.
While holding down , also press and hold / on the
unit for at least 2 seconds. ("App OFF" appears in the
display to show that the App's link function has been
deactivated.)
To re-activate the App's link function, repeat the above
steps. ("App ON" appears in the display to show that the
App's link function has been activated.)
repeatedly to select the desired audio