- ページ 17

ステレオシステム Sony SA-40SE1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SA-40SE1 20 ページ。 All-in-one soundbar
Sony SA-40SE1 にも：限定保証 (1 ページ), 仕様 (2 ページ)

ページを印刷する

OTHER

The STANDBY indicator flashes.

• Turn off the unit and unplug the AC power

cord (mains lead) immediately.

• Remove anything that is blocking the

ventilation hole.

If the unit still does not operate

properly after performing the

above measures, reset the unit

as follows:

Use the button on the unit for the operation.

Press ?/1 to turn on the unit.

Hold down ?/1 for 5 seconds.

STANDBY indicator flashes 3 times and

the unit is reset to the default settings.

Specifications

Amplifier section

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(FTC)

(USA model only)

L + R

With 8 ohm loads, both

channels driven, from 300

– 20,000 Hz; rated 14 watts

per channel minimum

RMS power, with no more

than 1% total harmonic

distortion from 250

milliwatts to rated output.

POWER OUTPUT (reference)

L / R

20 W (per channel at

8 ohms, 1 kHz)

(China model only)

POWER OUTPUT (rated)

(Measured under MOVIE sound field)

L + R

9.5 W + 9.5 W

(at 8 ohms, 1 kHz,

1% THD)

(Other models)

POWER OUTPUT (rated)

L + R

16 W + 16 W

(at 8 ohms, 1 kHz,

1% THD)

POWER OUTPUT (reference)

L / R

20 W (per channel at

8 ohms, 1 kHz, 10% THD)

continued