- ページ 19

ステレオシステム Sony SA-NS300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SA-NS300 40 ページ。 Wireless network speakers
Sony SA-NS300 にも：操作説明 (2 ページ), 取扱説明書 (14 ページ), 重要な安全上のご注意 (1 ページ), 仕様 (4 ページ), 限定保証 (1 ページ), クイックセットアップ (2 ページ), クイック・スタート・マニュアル (2 ページ)

Check whether your computer

and router are turned on.

Turn the unit on.

Click [My Network] or [Network]

t [SA-NS300].

The [Sony Network Device Setting]

screen appears.

Notes

• Install the UPnP service in advance if you are

using Windows XP (page 28).

• Check your set-up of the firewall of the

security software if you cannot find

[SA-NS300] or the browser does not open

even if you double-click [SA-NS300] on

screen of your computer.

• Restart your computer if you cannot find

[SA-NS300].

Select the desired language

when the "Language Setup"

screen appears.

Select [Network Settings] from

the menu.

Remove the checkmark in the

check box beside [Automatic

Setup], then input the required

information for each item.

• IP address (IP address of the unit)

• Subnet Mask (Subnet Mask)

• Default Gateway (Default Gateway)

• PrimaryDNS (IP address of the primary

DNS)

• SecondaryDNS (IP address of the

Secondary DNS)

Click [Apply].

Click [OK] when the

confirmation screen of the

pop-up window appears.

The unit restarts automatically, then the

LINK indicator lights up in amber when

the connection is made.

Note

Set the DHCP setting of your computer and

router to OFF again.

Apply