- ページ 10

ステレオシステム Sony SA-NS400のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SA-NS400 40 ページ。 Wireless network speakers
Sony SA-NS400 にも：取扱説明書 (14 ページ), クイック・スタート・マニュアル (2 ページ), 仕様 (4 ページ), 限定保証 (1 ページ), クイックセットアップ (2 ページ), 特徴 (2 ページ), 取扱説明書 (45 ページ), クイック・スタート・マニュアル (2 ページ)

Rear

H WPS button

Use to make the network settings for the

WPS push button configuration (page 16).

I DC IN terminal

Use to connect the supplied AC adaptor

(page 12).

J AUDIO IN terminal

Use to connect the audio output jack of an

external component.

(LAN) port

Use to connect the network (LAN) cable.

L Power switch

Slide the switch to turn the power on or off.

Note

You cannot operate this unit via a home network

when the power switch is set to OFF. Set the unit

to the network standby mode when you want to

operate the unit via a home network. Refer to

"To set the network standby mode" (page 13).

M ALL RESET button

Press and hold for more than three seconds

to reset the unit to its factory default

settings when the power switch is set to

ON.

Use a thin object, such as a small pin.

The bookmark list (page 24) and any other

previously registered settings or

information will be reset.

Note

Network settings are also reset when you press

ALL RESET button.

ALL RESET

button