- ページ 30
ステレオシステム Sony SHAKE-7のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SHAKE-7 44 ページ。 Mini hifi component system
ページを印刷する
5
Use the same procedure as in
step 4 to set the time to stop
playback or transferring.
6
Press
the sound source you want, then
press
For Recording Timer:
Connect a transferable USB device to
the
B port.
7
Press "/1 to turn off the system.
To check the timer setting or
activate the timer again
1
Press TIMER MENU.
"TIMER SELECT" flashes in the
display panel.
2
Press
3
Press
"PLAY SELECT" or "REC
SELECT", then press
To cancel the timer
Repeat the same procedure as above and
select "TIMER OFF" in step 3, and then
press
.
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
"STANDBY" flashes in the display panel, the
Play Timer and the Recording Timer will not
play or transfer.
• Do not operate the system from the time the
system turns on until the playback or
transferring starts.
GB
30
/
repeatedly to select
.
.
/
repeatedly to select
.
Changing the display
Changing the display mode
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Changing the spectrum
pattern of the display panel
1
Press OPTIONS on the unit.
2
Press
/
repeatedly to select
"SPECTRUM", then press
3
Press
/
repeatedly to select
the spectrum pattern you want,
then press
To exit the OPTIONS menu, press
OPTIONS on the unit.
.
.