ステレオシステム Sony SRS-BTX300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SRS-BTX300 2 ページ。 Personal audio system
Sony SRS-BTX300 にも：スタートアップマニュアル (2 ページ), 操作説明 (2 ページ), ユーザーマニュアル (2 ページ), 操作説明 (2 ページ)

ページを印刷する

Personal Audio System

Operating Instructions

SRS-BTX300

English

Personal Audio System

What is Bluetooth

Before operating the system, please read this guide

Wireless Technology?

thoroughly and retain it for future reference.

WARNING

Bluetooth wireless technology is a short-range wireless

technology that enables wireless data communication

between digital devices, such as a computer and digital

To reduce the risk of fire or electric shock, do not

camera. Bluetooth wireless technology operates within a range

expose this apparatus to rain or moisture.

of about 10 m.

To reduce the risk of fire, do not cover the ventilation of the

Connecting two devices as necessary is common, but some

devices can be connected to multiple devices at the same

apparatus with newspapers, tablecloths, curtains, etc. And do

time.

not place lighted candles on the apparatus.

You do not need to use a cable for connection, nor is it

To reduce the risk of fire or electric shock, do not expose this

necessary for the devices to face one another, such is the case

apparatus to dripping or splashing, and do not place objects

with infrared technology. For example, you can use such a

filled with liquids, such as vases, on the apparatus.

device in a bag or pocket.

Bluetooth standard is an international standard supported by

Do not install the appliance in a confined space, such as a

thousands of companies all over the world, and employed by

bookcase or built-in cabinet.

various companies worldwide.

Do not expose the batteries (battery pack or batteries

Communication system and

installed) to excessive heat such as sunshine, fire or the like for

compatible Bluetooth profiles of the

a long time.

system

As the main plug of AC adaptor is used to disconnect the AC

adaptor from the mains, connect it to an easily accessible AC

Profile is standardisation of the function for each Bluetooth

outlet. Should you notice an abnormality in it, disconnect it

device specification. The system supports the following

from the AC outlet immediately.

Bluetooth version and profiles:

Communication System:

The unit is not disconnected from the AC power source

Bluetooth Specification version 3.0

(mains) as long as it is connected to the wall outlet, even if the

Compatible Bluetooth Profiles:

unit itself has been turned off.

–

A2DP (Advanced Audio Distribution Profile): Transmitting

or receiving audio content of high-quality.

The nameplate and important information concerning safety

–

AVRCP (Audio Video Remote Control Profile): Controlling

are located on the bottom exterior of the main unit and on the

surface of the AC adaptor.

the volume.

–

HSP (Headset Profile): Talking on the phone/Operating the

On Copyrights and Licenses

phone.

The Bluetooth® word mark and logos are owned by the

–

HFP (Hands-free Profile): Talking on the phone/Operating

Bluetooth SIG, Inc. and any use of such marks by Sony

the phone by hands-free.

Corporation is under license.

Maximum communication range

The N Mark is a trademark or registered trademark of NFC

Forum, Inc. in the United States and in other countries.

Use Bluetooth devices within 10 m (line of sight) of the system.

Android is a trademark of Google Inc.

Maximum communication range may shorten under the

iPhone is a trademark of Apple Inc., registered in the U.S. and

following conditions.

other countries.

–

There is an obstacle such as a person, metal, or wall

Other trademarks and trade names are those of their

between the system and Bluetooth device.

respective owners.

–

A wireless LAN device is in use near the system.

–

A microwave oven is in use near the system.

Precautions

–

A device that generates electromagnetic radiation is in

use near the system.

Notes when using with a mobile phone

Interference from other devices

 For details on operation of your mobile phone when

receiving a telephone call while transmitting the sound

Because Bluetooth devices and wireless LAN (IEEE802.11b/g)

using the Bluetooth connection, refer to the operating

use the same frequency, microwave interference may occur

instructions supplied with the mobile phone.

and resulting in communication speed deterioration, noise, or

invalid connection if the system is used near a wireless LAN

On safety

device. In such a case, perform the following.

–

Use the system at least 10 m away from the wireless LAN

Notes on the AC adaptor

device.

 When connecting or disconnecting the AC adaptor, turn off

–

If the system is used within 10 m of a wireless LAN device,

the system beforehand. Otherwise, it may cause

turn off the wireless LAN device.

malfunction.

Interference to other devices

 Use only the supplied AC adaptor. To avoid damaging the

system, do not use any other AC adaptor.

Microwaves emitting from a Bluetooth device may affect the

operation of electronic medical devices. Turn off the system

and other Bluetooth devices in the following locations, as it

may cause an accident.

–

where inflammable gas is present, in a hospital, train,

Polarity of the plug

airplane, or a gas station

 Plug the AC adaptor into a nearby wall outlet (mains). In the

–

near automatic doors or a fire alarm

case of a problem, unplug it from the wall outlet (mains)

immediately.

Notes

 Do not install the AC adaptor in a confined space, such as a

 To be able to use the Bluetooth function, the Bluetooth

bookcase or built-in cabinet.

device to be connected requires the same profile as the

 To reduce the risk of fire or electric shock, do not expose the

system's.

AC adaptor to dripping or splashing, and do not place

Note also that even if the same profile exists, devices may

objects filled with liquids, such as vases, on the AC adaptor.

vary in function depending on their specifications.

 Due to the characteristic of Bluetooth wireless technology,

On placement

the sound played on the system is slightly delayed from the

 Do not set the speaker in an inclined position.

sound played on the Bluetooth device during talking on the

 Do not leave the system in a location near heat sources, or

telephone or listening to the music.

in a place subject to direct sunlight, excessive dust,

 This system supports security capabilities that comply with

moisture, rain or mechanical shock.

the Bluetooth standard to provide a secure connection

when the Bluetooth wireless technology is used, but

On operation

security may not be enough depending on the setting. Be

 Do not insert any small objects, etc., into the jacks or

careful when communicating using Bluetooth wireless

ventilation hole on the rear of the system. The system may

technology.

short out or malfunction.

 We do not take any responsibility for the leakage of

information during Bluetooth communication.

On cleaning

 A device featuring the Bluetooth function is required to

 Do not use alcohol, benzine, or thinner to clean the cabinet.

conform to the Bluetooth standard specified by Bluetooth

SIG, and be authenticated. Even if the connected device

Others

conforms to the above mentioned Bluetooth standard,

 If you have any questions or problems concerning this

some devices may not be connected or work correctly,

system that are not covered in this manual, please consult

depending on the features or specifications of the device.

your nearest Sony dealer.

 Noise or sound skips may occur depending on the Bluetooth

device connected with the system, the communication

environment or the usage environment.

4-449-951-32(1)

VOLUME −/+

buttons

(call) button

BATTERY/CHARGE

indicator

N-mark

Illumination lamp

Microphone

AUDIO IN jack

DC IN12.5V

jack

Function of Parts

BATTERY/CHARGE indicator

Lights up, flashes or turns off depending on the status of

the system.

For details, see the following section, "Indications of BATTERY/

CHARGE indicator. "

N-mark

Touch to make Bluetooth connection with an NFC

compatible smartphone.

(call) button

Press to call or operate during a call.

VOLUME −/+ buttons

Adjusts the volume.

LOCK RELEASE switch

Use for opening and closing the side stand.

Side stand

Open to use the system.

Illumination lamp

Lights up in a variety of colors depending on the status of

the system. For details, see the following section,

"Indications of Illumination lamp. "

Microphone

Use during a call.

DC IN 12.5V jack

Connects the supplied AC adaptor.

AUDIO IN jack

Connects to the headphone jack of a portable audio device,

computer, etc., using a connecting cord (not supplied).

BLUETOOTH STANDBY switch

Turns on and off the Bluetooth standby mode.

RESET button

Resets the system.

DC OUT ONLY connector (USB)

Charges devices, such as your smartphone, etc. by

connecting to the DC OUT ONLY connector (USB connector).

SOUND button

Press to select a sound effect.

SOUND indicator

Lights up, according to the sound effect setting.

AUDIO IN button

Press to listen to sound from a device connected by a

connecting cord (not supplied).

AUDIO IN indicator (amber)

Lights up in AUDIO IN mode.

BLUETOOTH-PAIRING button

Press to pair with a Bluetooth device.

Bluetooth indicator (blue)

Lights up, flashes or turns off depending on the

communication status.

For details, see the following section, "Indications of the

Bluetooth function. "

/ button

Turns the system on/off.

Indications of BATTERY/CHARGE

indicator (built-in lithium-ion battery)

Status

BATTERY/CHARGE indicator

System turned on

Lights up (green) (battery

operation only)

Battery requires charging

Flashes (green)

Lights up (amber)

Charging battery

Off

Charging complete

Indications of Illumination lamp

Status

Illumination lamp

AUDIO IN mode

Lights up (white)

Searching for a device

Connecting to Bluetooth

Lights up (blue)

device

Pressing VOLUME−/+

Flashes once (white)

buttons

When the volume hits the

Flashes three times (white)

maximum or minimum

Tip

 To turn the illumination on/off, hold down the

BLUETOOTH-PAIRING button, then press and hold the /

button.

Indications of the Bluetooth function

Status

Bluetooth indicator (blue)

Pairing with a device

Flashes quickly

Searching for a device

Flashes

Connected to a device

Lights up

Bluetooth standby mode

Flashes slowly

SOUND button/

indicator

LOCK RELEASE

AUDIO IN button/

switch

indicator

BLUETOOTH -PAIRING

button

Side stand

Bluetooth indicator

/ button

RESET

button

BLUETOOTH

DC OUT ONLY

STANDBY switch

connector (USB)

Opening the Side Stand

Open the side stand and operate the buttons inside. The side

stand also functions as a support while using the system.

Slide the LOCK RELEASE switch in the direction of the arrow

(illustration) to open the side stand.

To close the side stand

Close the side stand when you carry the system.

Slide the LOCK RELEASE switch in the direction shown by the

arrow above, then close the side stand by hand.

The system automatically turns off when the side stand is

closed.

Turning the System on

and off/Charging the

system

This system can operate by AC adaptor or built-in lithium-ion

battery (rechargeable). Charge the battery before using the

system for the first time.

Connect the supplied AC adaptor.

The BATTERY/CHARGE indicator (amber) lights up when

the battery is being charged, and turns off when charging

is complete. It takes approximately 4 hours to charge the

battery.

Press the / button.

Tip

 You can operate the system by battery instead of the AC adaptor

by charging the system before use.

Notes

 When the BATTERY/CHARGE indicator flashes as below,

charge the system. In these cases, you cannot charge

devices via the DC OUT ONLY connector.

–

Flashes (green) (Battery power is low).

–

Flashes (amber), then turns off after turning on the system

(No battery power remaining).

 When you switch the power source between AC adaptor

and battery by connecting/disconnecting the AC adaptor,

the system stops sound output for a short while. This is not

a malfunction.

 The maximum power output will be lower when the AC

adaptor is disconnected.

 In an extremely cold or hot environment, note the following

Pattern B

points.

Connecting with a paired

–

When operating by the AC adaptor, charging may complete

too quickly, or may not be possible.

Bluetooth device

–

When operating on battery only, the system may stop after

the BATTERY/CHARGE indicator flashes (green) three times.

 Charge the battery at least twice a year.

Turn on the system.

 Repeated recharging causes the capacity of the battery to

The Bluetooth indicator (blue) flashes.

decrease over time. When the battery life drops to half the

If the AUDIO IN indicator (amber) lights up, press the

usual time, even after a full charge, contact your nearest

BLUETOOTH-PAIRING button.

Sony dealer to replace the battery.

To reset the system

Set the Bluetooth function of the Bluetooth

device to on.

Press the RESET button on the rear of the system with a

pointed object if the buttons on the system do not function.

Tip

 In the case of the last-connected Bluetooth device, the

system tries to re-establish Bluetooth connection with it if

How to Make Wireless

the device's Bluetooth function is on. When Bluetooth

connection is established, the Bluetooth indicator (blue) on

Connection with

the system stays on.

Select "SRS-BTX300" shown in the display of

Bluetooth Devices

the Bluetooth device.

If necessary, select a Bluetooth profile that the system

You can enjoy music and hands-free calling with the system

supports from the following: A2DP, HSP or HFP. For details

wirelessly by using your device's Bluetooth function.

on each profile, see "What is Bluetooth Wireless Technology?"

Choose one of the following three connection methods, best

The Bluetooth connection is established and the Bluetooth

suited for the Bluetooth device. For details on how to operate

indicator (blue) on the system stays on.

your device, refer to the operating instructions supplied with

the device.

Notes

 This step may not be necessary for some devices.

Pairing with a Bluetooth device:

 If the system cannot connect to the Bluetooth device, delete

see

Pattern A

"SRS-BTX300" from the Bluetooth device, then perform

pairing again.

Bluetooth devices need to be "paired" with each other

beforehand.

Bluetooth standby mode

Connecting with a paired device:

When the Bluetooth standby mode is set to ON, the system can

see

Pattern B

be turned on and operated by a Bluetooth device.

To listen to music with a Bluetooth device that has been

paired, see this pattern.

One touch connection with a smartphone (NFC):

see

Pattern C

Using an NFC compatible smartphone, you can establish a

Bluetooth connection by just touching the system with it.

Check the following before operating the system.

 Both the system and the device are placed within 1 m of

each other.

 The system is connected to the AC adaptor, or the battery is

sufficiently charged.

 The operating instructions supplied with the device are at

hand.

Pattern A

Pairing and connecting with a

Notes

Bluetooth device

 The Bluetooth standby function will be turned off

automatically when the side stand is closed.

 If the system is being powered by battery, even if the

Turn on the system.

system is turned off, battery power will continue to be

The Bluetooth indicator (blue) flashes.

consumed if the BLUETOOTH STANDBY switch is set to ON.

If the AUDIO IN indicator (amber) lights up, press the

BLUETOOTH-PAIRING button.

Pattern C

Set the Bluetooth function of the Bluetooth

Connecting with a smartphone

device to on.

by One touch (NFC)

For details, refer to the operating instructions supplied

with the device.

By just touching the system with an NFC compatible

smartphone, the system is turned on automatically and then

Press and hold the BLUETOOTH-PAIRING

paired and connected with the smartphone.

button on the system until two beeps are

Download and install the app "NFC Easy

heard.

Connect" on the smartphone.

The Bluetooth indicator (blue) begins to flash quickly and

pairing mode is entered.

"NFC Easy Connect" is an original app by Sony for Android

phones, and is available at Google Play Store.

Tip

Search for "NFC Easy Connect" or scan the following two-

 When the system is turned on first time, the Bluetooth

dimensional code to download and install the free app.

indicator (blue) starts flashing quickly.

Communication fees are required to download the app.

The app may not be downloadable in some country/

regions.

Tip

 For some smartphones, One touch connection may be

available without downloading the app "NFC Easy Connect. "

In that case, the operation and specifications may be

different from the description here. For details, refer to the

operating instructions supplied with the smartphone.

By the two-dimensional code:

Use a two-dimensional code reader app.

Flashes quickly

Compatible smartphones

 Smartphones with the NFC function built-in

Perform the pairing procedure on the

(OS: Android 2.3.3 or later, excluding Android 3.x)

Bluetooth device to detect the system.

About NFC

Select "SRS-BTX300" shown in the display of

NFC (Near Field Communication) is a technology enabling

the Bluetooth device.

short-range wireless communication between various

If "SRS- BTX300" does not appear on the device's display,

devices, such as mobile phones and IC tags. Thanks to the

repeat from step 2.

NFC function, data communication can be achieved easily

just by touching the relevant symbol or designated

Note

location on NFC compatible devices.

 Some devices cannot display a list of detected devices.

Start the app "NFC Easy Connect" on the

If Passcode* input is required on the display

smartphone.

of the Bluetooth device, input "0000. "

Make sure that the application screen is displayed.

The Bluetooth connection is established and the Bluetooth

indicator (blue) on the system stays on.

Touch the system with the smartphone.

* Passcode may be called "Passkey, " "PIN code, " "PIN

Keep touching the smartphone on the N marked part of

number, " or "Password. "

the system until the smartphone vibrates.

Tip

Smartphone vibrates

 To pair with other Bluetooth devices, repeat steps 2 to 6 for each

(system recognized)

device.

Notes

 Pairing mode of the system is cancelled after about 5 minutes,

and the Bluetooth indicator (blue) flashes. If the pairing mode is

cancelled while performing this procedure, start over from step

 Passcode of the system is fixed as "0000. " The system cannot be

paired with a Bluetooth device whose Passcode is not "0000. "

 Once Bluetooth devices are paired, there is no need to pair those

devices again. However, in the following case, you will need to

perform the pairing procedure again.

–

The system is paired with 9 or more devices.

The system can be paired with up to 8 Bluetooth devices. If a

new device is paired after 8 devices have been paired, the

device whose latest connection time is the oldest among the

8 paired devices is replaced by the new one.

 More than one device can be paired with the system, but sound

will be heard from just one of those devices.

Follow the on-screen instructions to establish the

connection.

When the Bluetooth connection is established, the

Bluetooth indicator (blue) stays on.

Tips

 If it is difficult to establish the connection, try the following.

–

Activate the app "NFC Easy Connect" and move the

smartphone slightly on the N marked part of the system.

–

If the smartphone is in a case, remove it.

 Touch the system with the smartphone again to disconnect.

 If you have multiple NFC compatible devices, just touch the

smartphone to a different device to switch the connection

to that device. For example, when your smartphone is

connected with NFC compatible headphones, just touch the

smartphone to the system to change the Bluetooth

connection to the system (One touch connection switching).

Lights up