- ページ 14

ステレオシステム Sony SRS-ZR7のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony SRS-ZR7 28 ページ。 Personal audio system
Sony SRS-ZR7 にも：取扱説明書 (7 ページ), 操作説明 (2 ページ), 操作説明 (2 ページ), 操作説明 (2 ページ), 操作説明 (2 ページ)

ページを印刷する

1. Disassembly Flow

SRS-ZR7

2-6.

PLATE BOTTOM ASSY

Note 1: Lay a soft piece of cloth under the unit

to avoid damaging the top panel.

adhesive sheet

(plate bottom)

5 Insert your finger in the crevice

between the plate bottom assy and the

cabinet, and while peeling off the

adhesive surface, remove the

plate bottom assy carefully.

1 two cushions (foot)

2 two screws

(BTTP M2.6

3 two foot

4 Insert two screwdrivers into

the hole, and lift the plate

bottom assy slightly.

Note 2: The screwdriver is inserted between the

2 two screws

(BTTP M2.6

plate bottom assy and chassis, then lift

the plate bottom assy.

screwdriver

plate bottom assy

bracket (PWB MAIN)

chassis

6 plate bottom assy

Note 3: When removing this parts, it is not re-used to deform.

If this parts is deformed, replace it with new parts.

When replacing the plate bottom assy, peel the serial label

on the plate (bottom) carefully, and stick the serial label to

the new plate (bottom) (Refer to the figure below).

old plate (bottom)

1 two cushions (foot)

2 two screws

(BTTP M2.6

3 two foot

bottom side

front side

serial label

new plate (bottom)