- ページ 26
ステレオシステム Sony SS-SHAKE55のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony SS-SHAKE55 48 ページ。 Home audio system
Sony SS-SHAKE55 にも： サービスマニュアル (10 ページ)
ページを印刷する
When the Bluetooth connection is
established, the BLUETOOTH
indicator stops flashing and remains
light up. Bluetooth device name
appears in the display panel.
You can switch the sound source from
the smartphone to another NFC-
compatible Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
Tip
If pairing and the Bluetooth connection fail, do
the following.
– Relaunch "NFC Easy Connect" and move the
smartphone slowly over the N-Mark.
– Remove the case from the smartphone if using
a commercially available smartphone case.
To play music from the smartphone
Start playing of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.
To disconnect the smartphone
Touch the smartphone to the N-Mark on
the system again.
Listening to music
wirelessly on a
Bluetooth device
You can listen to music from your
Bluetooth device over a wireless
connection.
Check the information on the website
about compatible Bluetooth devices
(page 36).
GB
26
Pairing this system with a
Bluetooth device
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be
performed again. If your device is an
NFC-compatible smartphone, the manual
pairing procedure is not necessary.
1
Place the Bluetooth device
within 1 meter (3 feet) from the
system.
2
Press BLUETOOTH on the unit
to select Bluetooth function.
"BLUETOOTH" appears in the
display panel.
Note
If the system is connected to a Bluetooth
device, press BLUETOOTH to disconnect
the Bluetooth device.
3
Hold down BLUETOOTH on the
unit for 2 seconds or more.
"PAIRING" flashes in the display
panel.
4
Perform the pairing procedure
on the Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
5
Select the model number of the
unit on the display of the
Bluetooth device.
For example, select
"SONY:SHAKE-99" (or SHAKE-77/
SHAKE-55/SHAKE-33).
If passkey is required on the Bluetooth
device, enter "0000".