- ページ 31
ステレオシステム Sony STR-DA80ES - Fm Stereo / Fm-am ReceiverのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 40 ページ。 Limited warranty (es products)
Sony STR-DA80ES - Fm Stereo / Fm-am Receiver にも： 取扱説明書 (39 ページ), 技術的背景 (38 ページ), 限定保証 (1 ページ)
ページを印刷する
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 8-ohm load, both
channels driven, from 20 -
20,000 Hz, rated 100 watts
per channel, minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output
(USA model only).
Amplifier section
POWER OUTPUT
Stereo mode
(8 ohms 20 Hz - 20 kHz,
THD 0.05%)
100 W + 100 W
Surround mode (8 ohms at 1 kHz, THD
0.05%)
Front: 100 W/ch
Center
1)
: 100W
Rear
1)
: 100 W/ch
1) Depending on the sound
field settings and the
source, sound will not be
output.
Dynamic power output
155 W + 155 W, 8 ohms
220 W + 220 W, 4 ohms
Harmonic distortion at rated output
Less than 0.05% (with
DIRECT PASS on)
Frequency response
PHONO:
RIAA equalization curve
±0.5 dB
CD, TAPE, DAT/MD,
VIDEO 1, 2, 3, LD/DVD,
TV (/DBS) :
+0.5
10 Hz - 50 kHz
–2
DIRECT PASS on)
Inputs
Sensitivity
Impedance
PHONO
2.5 mV
CD
200 mV
TAPE, DAT/
MD, VIDEO
200 mV
1, 2, 3,
LD,TV/DBS
LD DVD
—
AC-3 RF IN
LD DVD
0.5 Vp-p
COAXIAL
IN
LD DVD/TV
(DBS)/CD/
—
DAT MD
OPTICAL IN
Outputs
VIDEO 1, 2 AUDIO OUT:
Voltage: 200 mV,
Impedance: 1 kilohm
PRE OUT
Voltage: 2 Vrms
Impedance: 1 kilohm
PHONES:
Accepts low and high
impedance headphones
BASS BOOST
+6 dB at 70 Hz
Digital signal processor section
Modulation (A/D conversion)
High Density Linear
Converter
Demodulation (D/A conversion)
High Density Linear
Converter (Advanced
pulse D/A converter)
Sampling frequency
48 kHz
dB (with
Additional Information
Surround
S/N
(weighting
network,
input level)
2)
50
75 dB
kilohms
(A, 2.5 mV)
2)
50
82 dB
kilohms
(A, 150 mV)
100 dB
75 Ω
(A, 20kHz, LPF)
100 dB
75 Ω
(A, 20kHz, LPF)
100 dB
—
(A, 20kHz, LPF)
2) '78 IHF
Equalizer
FM tuner section
Tuning range
Antenna terminals
Sensitivity
Usable sensitivity
S/N
Harmonic distortion at 1 kHz
Separation
Frequency response
Selectivity
Getting Started
LFE MIX:
MUTE, –20 - 0 dB, 0.5 dB
step
D. RANGE COMP:
OFF, 0.1 - 0.9, STD, MAX
REAR level:
–20 - +10 dB, 0.5 dB step
CENTER level:
–20 - +10 dB, 0.5 dB step
SUB WOOFER level:
–20 - +10 dB, 0.5 dB step
EFFECT:
21-step adjustable
WALL:
17-step adjustable
SEAT F/R:
17-step adjustable
SEAT L/R:
17-step adjustable
REBERB time:
17-step adjustable
Depending on the sound
field, some parameters
may not be adjustable (see
page 25).
BAND: BASS/TREBLE
Turnover frequency:
Bass: 99 Hz - 992 Hz
Treble: 1.0 kHz - 8.6 kHz
Level: ±10 dB, 0.5 dB step
87.5 - 108.0 MHz
75 ohms, unbalanced
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
11.2 dBf, 2 µV (IHF)
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3%
Stereo: 0.5%
45 dB at 1 kHz
+0.5
30 Hz - 15 kHz
dB
–2
60 dB at 400 kHz
31