- ページ 3

ステレオシステム Sony STR-NX3のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony STR-NX3 42 ページ。 Tuner/amplifier
Sony STR-NX3 にも：サービスマニュアル (8 ページ)

ページを印刷する

SAFETY CHECK-OUT

After correcting the original service problem, perform the follow-

ing safety check before releasing the set to the customer:

Check the antenna terminals, metal trim, "metallized" knobs,

screws, and all other exposed metal parts for AC leakage.

Check leakage as described below.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and

from all exposed metal parts to any exposed metal part having a

return to chassis, must not exceed 0.5 mA (500 microamperes).

Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA

WT-540A. Follow the manufacturers' instructions to use these

instruments.

2. A battery-operated AC milliammeter. The Data Precision 245

digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a

VOM or battery-operated AC voltmeter. The "limit" indica-

tion is 0.75 V, so analog meters must have an accurate low-

voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-

amples of a passive VOM that is suitable. Nearly all battery

operated digital multimeters that have a 2 V AC range are suit-

able. (See Fig. A)

To Exposed Metal

Parts on Set

0.15 µ F

Fig. A. Using an AC voltmeter to check AC leakage.

SECTION 1

SERVICING NOTES

1.5 k Ω

voltmeter

(0.75 V)

Earth Ground

• MODEL IDENTIFICATION

– Rear Panel –

MODEL

NX1: AEP, UK and Korean models

NX1: US and Canadian models

NX1: Malaysia, Singapore, Thai and

Tourist models

NX3: AEP, UK, Korean and Australian models

NX3: US and Canadian models

NX3: Malaysia and Singapore models

PART No.

4-221-391-0[]

4-221-391-1[]

4-221-391-2[]

4-221-391-3[]

4-221-391-4[]

4-221-391-5[]