- ページ 4
ステレオシステム Sony TC-W421のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony TC-W421 19 ページ。 Stereo cassette deck
Sony TC-W421 にも： 取扱説明書 (25 ページ)
ページを印刷する
TC-W421
Record/Playback Head Azimuth Adjustment
Procedure:
1.
Mode: Playback
test tape
P-4-A100
(10 kHz, — 10 dB)
PERE:
LINE OUT
2.
Turn the adjustment screw for the maximum output levels. If these
levels do not match, turn the adjustment screw until both of output
levels match together within 1 dB.
within
R-CH
peak
screw
3.
Phase Check
Mode: Playback
test tape
P-4-A100
(10 kHz, ~ 10 dB)
L-CH
oscilloscope
LINE OUT
Screen pattern
in phase 45°
90°
135°
180°
Ry
teal
Nemnntiemnnmnyaarmnnnncmnnd
good
;
wrong
4.
After the adjustment, lock the screws with locking compound.
Adjustment Location: Record/Playback head
Adjustment
|
eee) (DECK A)
SX
@ Press » (PLAY) button.
Tape Speed Adjustment
Procedure:
Mode: Playback
Perform high speed adjustment before normal speed adjustment.
test tape
WS-48B
frequency counter
(3 kHz, 0 dB)
LINE OUT
(high speed adjustment)
1.
Set to FWD playback mode.
2.
Short test pin CN504 on Main board.
3.
Adjust RV501 on main board so that the frequency counter reading
becomes 6,000 + 60 Hz.
4.
After adjustment, disconnect CN504 shorted in step 2.
(normal speed adjustment)
1.
Set to FWD playback mode.
2.
Adjust RV502 on Main board so that the frequency counter reading
becomes 3,000 + 30 Hz.
Frequency difference between the begining and the end of the tape should
be within 5%.
Adjustment Location: main board (See Page 6.)